Reverse sheet order issue

Discuss Thermwood 3-axis Machinery, Controller, and Software.

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Jim Bullis

Post Reply
Jeremy Schiffer
eCabinets Beta Tester
Posts: 1119
Joined: Tue, May 10 2005, 9:36PM
Company Name: Corlane Custom Cabinetry LLC
Country: UNITED STATES
Location: Carnesville, GA
Contact:

Reverse sheet order issue

Post by Jeremy Schiffer »

In CN 6.08 (THM desktop) When the "Reverse Sheet Order (global)" option is enabled, and offfall is added, the sheet printouts turn into a mess. Load a job, add a piece of material via Add Sheets, check Reverse Sheet Order, and nest. You have to print to a window or a printer for the issue to show.
http://www.corlanecabinetry.com

Intel Core i7-5820 3.3GHz, 16GB RAM, NVidia Quadro K2200 4GB, Windows 8.1 Pro 64 bit
CS-41 4x8
CS-45 5x12
Jeremy Schiffer
eCabinets Beta Tester
Posts: 1119
Joined: Tue, May 10 2005, 9:36PM
Company Name: Corlane Custom Cabinetry LLC
Country: UNITED STATES
Location: Carnesville, GA
Contact:

Re: Reverse sheet order issue

Post by Jeremy Schiffer »

Worth a thousand words
Capture.JPG
http://www.corlanecabinetry.com

Intel Core i7-5820 3.3GHz, 16GB RAM, NVidia Quadro K2200 4GB, Windows 8.1 Pro 64 bit
CS-41 4x8
CS-45 5x12
Larry Epplin
Thermwood Team
Posts: 668
Joined: Tue, May 17 2005, 12:44PM
Location: Thermwood

Re: Reverse sheet order issue

Post by Larry Epplin »

Thanks for the info Jeremy. We will get it fixed.
Post Reply