CN v6.11 manual nest crash

Discuss Thermwood 3-axis Machinery, Controller, and Software.

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Rich Kasten

Joe Soto
Guru Member
Posts: 346
Joined: Thu, May 19 2005, 7:50PM
Company Name: Fancyridge Wood Products LLC
Location: Greensburg, Ky

CN v6.11 manual nest crash

Postby Joe Soto » Tue, May 14 2019, 1:25PM

Any time I manually nest and end up with an empty sheet THM crashes when I write cnc. Pop up says empty sheets will be removed and sheets renumbered. Screen grays out and after a few minutes says software has stopped and must be restarted.
As long as I leave one part on every sheet it writes correctly.

Tommy Wieler
Junior Member
Posts: 58
Joined: Fri, Sep 22 2017, 7:49AM
Company Name: Silverpine Cabinets
Country: CANADA

Re: CN v6.11 manual nest crash

Postby Tommy Wieler » Tue, May 14 2019, 2:27PM

Same here

Thomas strembitsky
Guru Member
Posts: 259
Joined: Fri, Jul 27 2012, 12:30PM
Company Name: true form cabinets
Country: CANADA
Contact:

Re: CN v6.11 manual nest crash

Postby Thomas strembitsky » Tue, May 14 2019, 5:45PM

I just had this happen to me today. i can't send crash logs from the cnc for whatever reason but i hope it gets resolved cause i don't know how to delete an empty sheet outside of nest
Intel(R) Core(TM) i5-6400 @ 2.70GHz 8.00 GB RAM
NVIDIA GeForce GTX 950
Windows 10 Professional 64-bit
http://www.trueform.ca
CS43 cnc

Stuart Douglas
Junior Member
Posts: 95
Joined: Fri, Apr 10 2015, 7:57AM
Company Name: Bergman Custom Casework LLC
Country: UNITED STATES

Re: CN v6.11 manual nest crash

Postby Stuart Douglas » Wed, May 15 2019, 8:46AM

Can confirm. Often when manually nesting, I will cut a part from the last sheet and try to paste it into a previous sheet. After navigating to the previous sheet, I can't paste the part. It seems intermittent, sometimes it works, sometimes it doesn't.

Clint Buechlein
Thermwood Team
Posts: 420
Joined: Fri, May 15 2015, 1:21PM
Company Name: Thermwood Corp
Country: UNITED STATES

Re: CN v6.11 manual nest crash

Postby Clint Buechlein » Wed, May 15 2019, 9:45AM

I see the same thing with the empty sheet. I'll pass the information along to the software engineers. Hopefully will have it corrected for next release.

Stuart Douglas wrote:Can confirm. Often when manually nesting, I will cut a part from the last sheet and try to paste it into a previous sheet. After navigating to the previous sheet, I can't paste the part. It seems intermittent, sometimes it works, sometimes it doesn't.

I haven't come across an issue specifically like this, but was seeing some odd scenarios after creating a sheet and scrolling through the sheets. Now I can't get that to reproduce. This is on my desktop PC, only thing I can think is that an update to my graphics card driver corrected the issue. Let me know if you can get the issue to be consistent.

-Clint-

Clint Buechlein
Thermwood Team
Posts: 420
Joined: Fri, May 15 2015, 1:21PM
Company Name: Thermwood Corp
Country: UNITED STATES

Re: CN v6.11 manual nest crash

Postby Clint Buechlein » Wed, May 29 2019, 12:10PM

The empty sheet with a crash issue should be corrected with today's release of Control Nesting.

-Clint-


Return to “Thermwood 3-Axis Machinery”

Who is online

Users browsing this forum: No registered users and 4 guests