Teach Line Issue

Discuss Thermwood 3-axis Machinery, Controller, and Software.

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Jim Bullis

Post Reply
Joe Soto
Guru Member
Posts: 367
Joined: Thu, May 19 2005, 7:50PM
Company Name: Fancyridge Wood Products LLC
Location: Greensburg, Ky

Teach Line Issue

Post by Joe Soto »

In CNC View, type T,M,L
Line Teach opens
Cursor is in axis box, type 1,enter
Cursor moves to Distance box, type 10(or any number) ,F11 or F12 no movement. Same with step plus and minus buttons they turn blue but no motion. MDI move is checked. F10 or undo teach returns to CNC view.
Type T,M,L, 1 enter,10 enter and machine moves 10". Enter again nothing. Type 10 in the distance box nothing. Hit F4 cursor moves to second axis box, type 1, enter,10,enter and the machine moves.
Post Reply