Can anyone shed some light on this issue. 3/8" cuts the tenon. 1/2" cuts the outline.
You can see in the picture that the 2 cuts are not lining up. I have checked the diameters of the 2 tools.
I have seen this before but cant remember what the fix was
Can anyone help
Thanks
Ian
Tenon issue
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Jim Bullis
-
- Junior Member
- Posts: 76
- Joined: Fri, Feb 15 2013, 5:21PM
- Company Name: Millworx
- Country: CANADA
-
- eCabinets Beta Tester
- Posts: 1119
- Joined: Tue, May 10 2005, 9:36PM
- Company Name: Corlane Custom Cabinetry LLC
- Country: UNITED STATES
- Location: Carnesville, GA
- Contact:
Re: Tenon issue
We definitely had an issue that caused the same result, and it turned out that the bolts holding the Z-axis guide rails to the mounting plate had come loose, and the head was wandering because of it. Check all of your fasteners, including the ones holding the motor to its mounting plate.
http://www.corlanecabinetry.com
Intel Core i7-5820 3.3GHz, 16GB RAM, NVidia Quadro K2200 4GB, Windows 8.1 Pro 64 bit
CS-41 4x8
CS-45 5x12
Intel Core i7-5820 3.3GHz, 16GB RAM, NVidia Quadro K2200 4GB, Windows 8.1 Pro 64 bit
CS-41 4x8
CS-45 5x12