Flip Operations Fence

Discuss Thermwood 3-axis Machinery, Controller, and Software.

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Rich Kasten

Michael Kowalczyk
eCabinets Beta Tester
Posts: 284
Joined: Tue, May 10 2005, 11:35AM
Location: Houston, Texas

Postby Michael Kowalczyk » Mon, May 08 2006, 1:21PM

Thanks Bill for the info.
Michael Kowalczyk, GM

HP-Elite Quad Core Q6700-4 MB ram, Nvidia GeForce 512 MB Dual HP 22" flat panels, Windows 7 ultimate 64bit SP1

User avatar
Bill Rutherford
eCabinets Beta Tester
Posts: 386
Joined: Tue, May 10 2005, 5:23AM
Location: Lancaster, NH
Contact:

Postby Bill Rutherford » Mon, May 08 2006, 1:35PM

Jason,
Thanks for the update, you put a smile on my operators face :)
Bill Rutherford
North Woods Manufacturing
Full service CNC Machining
and Edge Banding
http://www.northwoodsmanufacturing.com

User avatar
Brian Shannon
eCabinets Beta Tester
Posts: 979
Joined: Thu, May 19 2005, 10:50PM
Location: Los Alamos, CA

Postby Brian Shannon » Mon, May 08 2006, 10:36PM

I am using a Busch 15HP pump. About a year ago I started using a wasteboard. It does hold the parts better. I have a 5 X 8 table. I thinned down some wood glue and brushed it on the edges and 6\" of the surface on each side(to seal from vacuum leakage). I tack on a 4 x 8 mdf wasteboard. Recently, I had to cut some 1\" MDF. Just for kicks, I layed a 2' x 2' pc. of Melamine on top of the 1' MDF. I think the vacuum held even stronger through all of this(3/4\"+1/4\"+ 1\"). Incredible holding power.

User avatar
Bill Rutherford
eCabinets Beta Tester
Posts: 386
Joined: Tue, May 10 2005, 5:23AM
Location: Lancaster, NH
Contact:

Postby Bill Rutherford » Wed, Jun 28 2006, 9:25AM

Jason,
I see a new version of Rolling Nest is out and I do not see the change for flip ops on wasteboards listed. Was it included? If not then could you please direct me to the \"official\" complaint form?? :lol:
(After all, you promised!!!!)
Bill Rutherford

North Woods Manufacturing

Full service CNC Machining

and Edge Banding

http://www.northwoodsmanufacturing.com

User avatar
Jason Susnjara
Thermwood Team
Posts: 1722
Joined: Tue, May 10 2005, 1:26PM
Location: Thermwood
Contact:

Postby Jason Susnjara » Thu, Jun 29 2006, 7:54AM

Hi Bill,

I will ask the programmers about this.

thanks,

User avatar
Brad McIntosh
Guru Member
Posts: 484
Joined: Wed, May 18 2005, 6:59PM
Company Name: CNC Automation
Location: St. Zotique, Québec, Canada
Contact:

Postby Brad McIntosh » Fri, Jul 07 2006, 2:25PM

Looks like Jason has some pull with the programmers! <smile>

7/05/06 - The latest version of Control Nesting is v4.94.

* KD operations not being done as drill operation in some cases (FIXED)
* Wasteboard option for flip ops in settings (ADDED)
* Ability to add a macro at header and/or footer for each sheet (ADDED)
* Changed Room# to Job name in printed sheet (ADDED)


Return to “Thermwood 3-Axis Machinery”

Who is online

Users browsing this forum: No registered users and 6 guests