dovetail nesting

Discuss Thermwood 3-axis Machinery, Controller, and Software.

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Jim Bullis

Post Reply
Conor Devoy
New Member
Posts: 20
Joined: Tue, Oct 04 2005, 8:32AM
Location: Dublin Ireland
Contact:

dovetail nesting

Post by Conor Devoy »

hi all, i was wondering has anyone used the dovetail nesting cutters on a non thermwood machine. i have just ordered the bits but obviously can't use e-cabinet software with my machine.

thanks for your help
Ryan Hochgesang

Post by Ryan Hochgesang »

The eCabinet Systems software is solely designed for usage with Thermwood CNC routers and no other cnc machinery. This is also true for the dovetail drawer box designs which are produced in eCab and the tooling related to producing parts on Thermwood machine.
Zach Froble
Senior Member
Posts: 171
Joined: Tue, Jun 21 2005, 3:23PM
Location: Connellsville, PA

Post by Zach Froble »

I am not an expert, I haven't ran the dovetailed drawers yet. The only thing you would have to check is how the code is written, or how the parts are machined. Tool aproach and depart would be one of my biggest concerns.

Like I said, I am not an expert on this just thinking about it.

Zach
Lyndan Designs
Machining and CAD Services
Post Reply