Connecting output relay card to TTL of Profibus and input

Discuss Thermwood 3-axis Machinery, Controller, and Software.

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Jim Bullis

Post Reply
SoulDiallo
New Member
Posts: 8
Joined: Tue, Jun 26 2007, 3:55PM

Connecting output relay card to TTL of Profibus and input

Post by SoulDiallo »

Please confirm that one of these cards can be used as interface to connect OUTPUT (Our machine is a M67DT510, installed this last may,07, reference C67dt404)


OPTO 22 G4 DC Output 5-60 VDC 16-channel Integral Rack

or

ALTRONIX RB610

The PROFIBUS I/O tiers goes up to 24 only. input 5,6,8,9,12 to19, 22 seems to be unused.(looking at the I/O list of the electrical diagram.
As well as some of the outputs.

Can we connect to these?

Thanks.
Carl Jones
Thermwood Team
Posts: 46
Joined: Fri, Mar 16 2007, 7:46AM

Post by Carl Jones »

Hi Soul,
The best thing for you to do is to call in and contact our retrofit department, to ensure that things will be hooked up correctly. There are unused inputs and outputs that can be used for varoius things. Please call in. 1-800-221-3865 and ask for \"retrofits\".

Thanks
Thermwood Technician
Post Reply