Thermwood,
Do you have any dxf drawings for a C40 4x8 machine. We are reorganizing and laying out our shop for better efficiency. I saw the dimensional drawings on the site, I was looking for a scaled drawing that I can drag around to find the best fit.
Zach
Cad drawings of machine
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Jim Bullis
-
- Senior Member
- Posts: 171
- Joined: Tue, Jun 21 2005, 3:23PM
- Location: Connellsville, PA
Cad drawings of machine
Lyndan Designs
Machining and CAD Services
Machining and CAD Services
Re: Cad drawings of machine
Hi Zach,
If you contact us directly with your machine base number, we can get you the dxf drawing of your machine foot print.
email: program@thermwood.com
Thanks!
If you contact us directly with your machine base number, we can get you the dxf drawing of your machine foot print.
email: program@thermwood.com
Thanks!
-
- Senior Member
- Posts: 171
- Joined: Tue, Jun 21 2005, 3:23PM
- Location: Connellsville, PA
Re: Cad drawings of machine
Ryan,
Thanks for the drawings they made it easier to adjust the position of the machine with the conveyors so I could get an exact layout.
Zach
Thanks for the drawings they made it easier to adjust the position of the machine with the conveyors so I could get an exact layout.
Zach
Lyndan Designs
Machining and CAD Services
Machining and CAD Services
-
- New Member
- Posts: 2
- Joined: Mon, Jun 22 2009, 7:50AM
- Company Name: E Designs
- Country: UNITED STATES
- Location: New Orleans, LA
- Contact:
Re: Cad drawings of machine
I just purchase a C40 from a cabinet shop. I am also trying to layout my shop in CAD. Is it also possible for me to obtain a copy of the DXF file for the C40 with a 4x8 table?
I am duplicating this request also via email to program@termwood.com
Thanks,
Ernest Myers
E Designs
New Orleans, LA
I am duplicating this request also via email to program@termwood.com
Thanks,
Ernest Myers
E Designs
New Orleans, LA