Locator Pins

Discuss Thermwood 3-axis Machinery, Controller, and Software.

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Rich Kasten

James Lovell
New Member
Posts: 13
Joined: Tue, Jun 16 2009, 7:58AM
Company Name: Can-Am Specialties

Locator Pins

Postby James Lovell » Mon, Jun 22 2009, 11:22AM

For some reason, entering single line text via the tab editor and inputing other M codes seems to work. For some reason I cannot get my pins to function at all. We have totally rebuilt each cylinder as well as the air distributor block underneath the table. It is listed in my manual as "M14" as ON, and "M15" as OFF.
Entering the single line code in the tab editor has been working for M codes. I have been able to turn on and down my, drills in the drill bank, my main spindle, my tool changer, as well as a custom add on saw. Remember I have have the 91/9100 controller which not seem similair to the 91/91000 controller that some people seem to keep refering to. This machine is from 1991 I believe. The controller software strictly works in DOSS. I have tried the "M61L8" as well as the "M62L8" codes with no prevail. Can anyone help me operate my pins?James Lovell
New Member

Posts: 5
Joined: Tue, Jun 16 2009, 7:58AM
Private messageE-mail

Ryan Hochgesang

Re: Locator Pins

Postby Ryan Hochgesang » Mon, Jun 22 2009, 11:44AM

If you supply your machine number to Thermwood service dept. we should be able to trace down the machine records for that particular machine a possibly help you in correct direction.

service@thermwood.com or program@thermwood.com


Return to “Thermwood 3-Axis Machinery”

Who is online

Users browsing this forum: No registered users and 4 guests