Thermwood 80 ES

Discuss Thermwood 3-axis Machinery, Controller, and Software.

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Rich Kasten

James Lovell
New Member
Posts: 13
Joined: Tue, Jun 16 2009, 7:58AM
Company Name: Can-Am Specialties

Thermwood 80 ES

Postby James Lovell » Tue, Jun 23 2009, 2:52PM

Does anyone out there run this exact machine that would be willing to answer some questions? We purchased the router used, and are trying to get started, but we have encountered a few functionality issues.

Ryan Hochgesang

Re: Thermwood 80 ES

Postby Ryan Hochgesang » Wed, Jun 24 2009, 11:42AM


I would recommend you contact Thermwood Service dept. and have a tech travel to your facility to go through the machine and insure that it is functional and correctly setup.

Contact info:
phone: 1800 221 3865 (ask for field service dept.)


Ryan Hochgesang

Re: Thermwood 80 ES

Postby Ryan Hochgesang » Fri, Jun 26 2009, 7:48AM

Hello James,

I've continued to look into the particular machine serial number in which you've supplied and there is no macro files here at Thermwood. It is likely that this machine shipped from the factory without macros and that the macros were made per customer. Machines of this time were typically sold and setup per customer and macros added once machine arrived to customer.

I did resent the PDF for the 91/9100 user control manual and was wondering if you have recieved it? This is likely going to be your best reference as you try to get your machine running.

Return to “Thermwood 3-Axis Machinery”

Who is online

Users browsing this forum: No registered users and 8 guests