Update on Bar design

Moderators: Jason Susnjara, Clint Buechlein

Post Reply
David Norton
Guru Member
Posts: 710
Joined: Thu, May 19 2005, 11:01AM
Company Name: Custom Trim and Millwork
Country: UNITED STATES
Location: Lawrenceburg,Tennessee

Update on Bar design

Post by David Norton »

Well I'm only three days behind schedule. Woohoo ! Gotta thank Jason Susnjara,& Kerry Fullington for getting me thru the parts editor problems.

I basically sat down this morning and knocked out the major portion of the countertop.
Attachments
Bar 1.jpg
Bar 1.jpg (80 KiB) Viewed 9143 times
Dave Norton
David Norton
Guru Member
Posts: 710
Joined: Thu, May 19 2005, 11:01AM
Company Name: Custom Trim and Millwork
Country: UNITED STATES
Location: Lawrenceburg,Tennessee

Post by David Norton »

Where'd the bar go? :)
Dave Norton
Douglas Walters
Junior Member
Posts: 44
Joined: Mon, Mar 13 2006, 6:35PM
Location: Sussex WI

Post by Douglas Walters »

David

Looks like the project is moving ahead nicely. I have not done anything in the parts editor yet but really need to. I will expect to run into a few problems myself. I hope not to many thou.

Doug
D Walters
Wood Architects
Douglas Walters
Junior Member
Posts: 44
Joined: Mon, Mar 13 2006, 6:35PM
Location: Sussex WI

Post by Douglas Walters »

David

Looks like the project is moving ahead nicely. I have not done anything in the parts editor yet but really need to. I will expect to run into a few problems myself. I hope not to many thou.

Doug
D Walters
Wood Architects
David Norton
Guru Member
Posts: 710
Joined: Thu, May 19 2005, 11:01AM
Company Name: Custom Trim and Millwork
Country: UNITED STATES
Location: Lawrenceburg,Tennessee

Found the 2nd .jpg.

Post by David Norton »

This thing took forever to save!
Attachments
Bar 2.jpg
Bar 2.jpg (92.32 KiB) Viewed 9135 times
Dave Norton
Brian Shannon
eCabinets Beta Tester
Posts: 979
Joined: Thu, May 19 2005, 10:50PM
Location: Los Alamos, CA

Post by Brian Shannon »

David,

That's VERY impressive! The good news is, it won't take as long to build as it did to design! Boy, that's a lot of work. Great job!


Brian
Kerry Fullington
Wizard Member
Posts: 4718
Joined: Mon, May 09 2005, 7:33PM
Company Name: Double E Cabinets
Country: UNITED STATES
Location: Amarillo, TX

Post by Kerry Fullington »

David,
That is quite a project. Post some closeups when you have time.
Have you shown your client yet?
Kerry
DanEpps
Wizard Member
Posts: 5852
Joined: Thu, Jul 28 2005, 10:18AM
Company Name: Dan Epps
Country: UNITED STATES
Location: Rocky Face GA

Post by DanEpps »

Be sure to post some completer project pictures too. We are all anxious to see how this project turns out.
David Norton
Guru Member
Posts: 710
Joined: Thu, May 19 2005, 11:01AM
Company Name: Custom Trim and Millwork
Country: UNITED STATES
Location: Lawrenceburg,Tennessee

Post by David Norton »

Clients have seen the design so far, which is why I still have the contract. Yippee :) As to completed photos I can only hope to get some. This job is supposed to be built in Colorado, Not sure if I will get there personally or not. Hopefully the installation team will be kind to me.

There is still quite a bit of work to do. I have decided to add a corner unit where the two smaller unit meet. This will maximaze cab space , and kill a dead corner. Plus there is the wainscot, and crowns to add. The owners have not decided on a finish yet ,which is why the current finish is plain mahogany. Work,work, it's back to the cab. editor now.....hehehe!

And thx everyone for the kind comments! :)
Dave Norton
Jeremy Schiffer
eCabinets Beta Tester
Posts: 1119
Joined: Tue, May 10 2005, 9:36PM
Company Name: Corlane Custom Cabinetry LLC
Country: UNITED STATES
Location: Carnesville, GA
Contact:

Post by Jeremy Schiffer »

That's incredible David. Great renderings too. I'm with everyone else, I wanna see pics of the finished project. Loan the install guys your camera if you have to! :wink:
http://www.corlanecabinetry.com

Intel Core i7-5820 3.3GHz, 16GB RAM, NVidia Quadro K2200 4GB, Windows 8.1 Pro 64 bit
CS-41 4x8
CS-45 5x12
Post Reply