bathroom vanity
Moderators: Jason Susnjara, Clint Buechlein
-
- Junior Member
- Posts: 78
- Joined: Sun, Jul 03 2005, 5:33AM
bathroom vanity
how much would you charge for this vanity?made with 3/4 birch ply w 1/2 birch back poplar face frames and panels
- Attachments
-
- New Pics.jpg (361.06 KiB) Viewed 7781 times
-
- Junior Member
- Posts: 83
- Joined: Sat, Dec 24 2005, 5:55PM
- Location: Highlands, North Carolina
Greg,
It looks about 30 to 32 inches wide. I assume that it has flat sides, no raised panel sides and that you are going to paint it. I am also assuming that the upper raised panel is a false front due to a sink in the vanity. If these assumptions are correct, I would charge $350 to $500 depending on whether it is one cabinet in a job or just one cabinet.
Bill
It looks about 30 to 32 inches wide. I assume that it has flat sides, no raised panel sides and that you are going to paint it. I am also assuming that the upper raised panel is a false front due to a sink in the vanity. If these assumptions are correct, I would charge $350 to $500 depending on whether it is one cabinet in a job or just one cabinet.
Bill
-
- Junior Member
- Posts: 78
- Joined: Sun, Jul 03 2005, 5:33AM
vanity
Bill your right .sorry i didnt post enough info vanity is 32 in wide the two drawers werw made of 1/2 in birch and it was sold unfinished i charged 225 for it
-
- Junior Member
- Posts: 83
- Joined: Sat, Dec 24 2005, 5:55PM
- Location: Highlands, North Carolina
Greg,
Unfinished that would seem about right. Have you ever thought about adding a raised panel end to any exposed side of the cabinet as an option for your customers. It increases the cost but it also increases the price and the beauty of the cabinet. I am posting a sample of the end that I use.
Bill
Unfinished that would seem about right. Have you ever thought about adding a raised panel end to any exposed side of the cabinet as an option for your customers. It increases the cost but it also increases the price and the beauty of the cabinet. I am posting a sample of the end that I use.
Bill
- Attachments
-
- Vertical Split Raised Panel Unfinished.jpg (58.01 KiB) Viewed 7759 times
-
- eCabinets Beta Tester
- Posts: 979
- Joined: Thu, May 19 2005, 10:50PM
- Location: Los Alamos, CA
-
- eCabinets Beta Tester
- Posts: 933
- Joined: Tue, May 17 2005, 2:48PM
- Location: Logansport, In
- Contact:
-
- Junior Member
- Posts: 78
- Joined: Sun, Jul 03 2005, 5:33AM
vanity
Bill I like that split raused panel end.your right that would dress up the cabinet but thats what the customer wanted nice work