Six Mirror Frame Moldings

Moderators: Jason Susnjara, Clint Buechlein

Post Reply
Paul Huff
Junior Member
Posts: 95
Joined: Thu, May 19 2005, 12:32AM
Location: Lubbock, Texas

Six Mirror Frame Moldings

Post by Paul Huff »

My boss Geron Stricklin owner of Stircklin Builders Inc. asked me to design a mirror frame for a home we have put a lot of nice work into. I made six so that he could pick one. He chose the lower middle profile for our mirror frame. We may never use the others so I thought I would just share them with everyone. I will put all six in a zip file in the customer tools section of this forum along with a PDF that shows how deep to set each of the bits if you plan to make the molding. Forgive the one on the bottom left that looks some much like the Italian Renaissance Credenza door molding. :twisted:
Paul Huff
Junior Member
Posts: 95
Joined: Thu, May 19 2005, 12:32AM
Location: Lubbock, Texas

Post by Paul Huff »

sorry my pics were not posted for some reason I am trying again one by one
Attachments
frames.jpg
frames.jpg (99.42 KiB) Viewed 4131 times
Paul Huff
Junior Member
Posts: 95
Joined: Thu, May 19 2005, 12:32AM
Location: Lubbock, Texas

Post by Paul Huff »

second pic
Attachments
molding2.jpg
molding2.jpg (83.7 KiB) Viewed 4129 times
Post Reply