Mitering cabinets
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- Junior Member
- Posts: 57
- Joined: Wed, Nov 01 2006, 6:33PM
- Location: Faribault MN
- Contact:
Mitering cabinets
We can't seem to grasp how to either, take a cabinet sitting at a 45 degree angle in the corner of a room and have a cabinet on each end return back to each wall - or just to make one cabinet with mitered returns on it. The MITERING part is what has been giving us the trouble. In both cases these are face frame cabinets. Any help in steering us in the right direction would be appreciated! Lee
-
- Wizard Member
- Posts: 5852
- Joined: Thu, Jul 28 2005, 10:18AM
- Company Name: Dan Epps
- Country: UNITED STATES
- Location: Rocky Face GA
Is this something like you want to do Lee (http://www.thermwood.com/forums/viewtopic.php)?
I think you are saying that you want to have a corner cabinet with ends like in the thread in that link. If so, what I would do is create separate cabinets, one for the corner unit and one for each end unit.
I think you are saying that you want to have a corner cabinet with ends like in the thread in that link. If so, what I would do is create separate cabinets, one for the corner unit and one for each end unit.