brightness when printing presentation image

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal

Post Reply
Joe Murphy
Junior Member
Posts: 73
Joined: Wed, Nov 30 2005, 9:26PM

brightness when printing presentation image

Post by Joe Murphy »

I have a room layout that with wich I am happy with the lighting and layout. However, when printed it is a little too dark. Hoew can I lighten it up?

Thanks,
Joe
Joseph Murphy
President
Highland Woodworking
Nelsonville, NY
Kerry Fullington
Wizard Member
Posts: 4718
Joined: Mon, May 09 2005, 7:33PM
Company Name: Double E Cabinets
Country: UNITED STATES
Location: Amarillo, TX

Post by Kerry Fullington »

Joe,
I like to save the images as jpegs then open them using the image control (Irfanview) in eCabinets. After opening the image click on image on the menu bar then choose enhance colors.
You can adjust the brightness and contrast here but I have had better luck using the Gamma Correction.
Enter a Gamma Correction value of 1.25 to 1.3 and that usually lightens the picture enough.
Just play with these controls till you get the result you want.
Kerry
Post Reply