conestoga doors not routing profile on top edge.

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal

Post Reply
Brian Bauer
Guru Member
Posts: 365
Joined: Tue, Sep 20 2005, 8:22PM
Location: Lower Lake, California
Contact:

conestoga doors not routing profile on top edge.

Post by Brian Bauer »

Take a look at this first time I have seen this.
Doors not routing edge detail on top edge.

Brian Bauer
Attachments
no rout on top of door.jpg
no rout on top of door.jpg (66.64 KiB) Viewed 5732 times
ballard above fridge upper.hsf
(257.6 KiB) Downloaded 368 times
Wood is wood , Particle Board is just dust !
Brian Shannon
eCabinets Beta Tester
Posts: 979
Joined: Thu, May 19 2005, 10:50PM
Location: Los Alamos, CA

Post by Brian Shannon »

Brian,


I messed with this cabinet for a while. That door is giving me all sorts of edge profile problems. Cannot rebuild bottom rail. Other Calistoga doors seem O.K.. Odd...


Brian
Michael Yeargain
eCabinets Beta Tester
Posts: 1740
Joined: Tue, May 17 2005, 8:33PM
Company Name: Timeless Cabinetry and Mantles
Location: South East

Post by Michael Yeargain »

I mentioned in an earlier post there was an issue with some of the doors. It seems to have appeared in the latest build. I think it was with the stile and rail doors. mitered doors didn't have this problem.
Intel Core i7-5820K (6-Cores, 3.3GHz, 15MB Cache)
32Gigs DDR4
NVIDIA GeForce GTX 960 4GB
SSD 840 256Gig, 2TB, 3TB, Samsung (2TB)
Corsair RM650
Brian Bauer
Guru Member
Posts: 365
Joined: Tue, Sep 20 2005, 8:22PM
Location: Lower Lake, California
Contact:

Post by Brian Bauer »

I was just wondering it doesn't look so good on the presentations.
Maybe something else for the programmers to look at :wink: .

Keep up the good fight busy programmers, Any word yet on the cutlist summary yet?Just finished a job and looked at it whoa, Little shy on the materials.

Brian Bauer
Wood is wood , Particle Board is just dust !
Michael Yeargain
eCabinets Beta Tester
Posts: 1740
Joined: Tue, May 17 2005, 8:33PM
Company Name: Timeless Cabinetry and Mantles
Location: South East

Post by Michael Yeargain »

Brian,

I'm sure they are solving this in the next build/version. There has been suggestions made to calculate board foot instead of the way we all see it now. Inches.
Intel Core i7-5820K (6-Cores, 3.3GHz, 15MB Cache)
32Gigs DDR4
NVIDIA GeForce GTX 960 4GB
SSD 840 256Gig, 2TB, 3TB, Samsung (2TB)
Corsair RM650
Post Reply