These are illustrations of our next project...
(but before you ask the illustrations were not created in e-cabinets)...most of the time (not always mind you...but most of the time) I use another program to sell the project and then I build it in ecabinets.
Hope you like it...
Mark
Our Next Project...
Moderators: Jason Susnjara, Clint Buechlein
-
- Guru Member
- Posts: 309
- Joined: Sat, Feb 04 2006, 5:13PM
- Location: Hilton Head / Bluffton SC
Our Next Project...
- Attachments
-
- craver-002.jpg (102.16 KiB) Viewed 7339 times
-
- craver-004.jpg (88.03 KiB) Viewed 7339 times
-
- Guru Member
- Posts: 365
- Joined: Tue, Sep 20 2005, 8:22PM
- Location: Lower Lake, California
- Contact:
-
- Wizard Member
- Posts: 4723
- Joined: Mon, May 09 2005, 7:33PM
- Company Name: Double E Cabinets
- Country: UNITED STATES
- Location: Amarillo, TX
-
- Guru Member
- Posts: 309
- Joined: Sat, Feb 04 2006, 5:13PM
- Location: Hilton Head / Bluffton SC
thanks for the kind comments gentlemen...I'm particularly looking forward to this job - I like the larger projects! It also has a number of things going on that are not reflected in the illustrations: the sofit above the french doors is actually a raised panel that follows the arch of the transom and the fourth corner which is not seen is actually not a corner it is a 5th wall with a convex radius of 17 feet which will be wrapped with the upper cabinetry and a wainscot following the radius. Reminds me of my days in the boat shop.
Kerry - I've been using eCabinets more and more for layouts and renderings, but mostly on simpler projects. Everything we build is custom, so I haven't really developed a \"complete library\" of cabinets yet.
We also handle two other lines of cabinetry, Showplace Wood Products and CWP Cabinetry - and I have become very adept with design using their \"library\" of boxes in 20-20. It is somewhat limiting, however laying out a room and popping \"pre-made\" boxes and (key word) accessories in is extremely fast. The program also allows a variety of modifications to the cabinetry which is simple and easy and I've learned how to quickly come up with a \"presentation look\" in order to limit my design time prior to a commitment on the job.
The other advantages this method provides for me is a base price (what my cost in those particular lines would be) and a detailed list of the various boxes and accessories needed to build the project. The other huge advantage is, if I can be accurate in design 20-20 produces all my installation line drawings (floor plan and elevations) including (wait for it...wait for it) - automatic dimensioning - with only a few clicks of the mouse!
So for me - the two programs complement each other...each with it's own strength and weaknesses, similar to using excel for exporting and manipulating the cut lists from eCabinets.
Mark
Kerry - I've been using eCabinets more and more for layouts and renderings, but mostly on simpler projects. Everything we build is custom, so I haven't really developed a \"complete library\" of cabinets yet.
We also handle two other lines of cabinetry, Showplace Wood Products and CWP Cabinetry - and I have become very adept with design using their \"library\" of boxes in 20-20. It is somewhat limiting, however laying out a room and popping \"pre-made\" boxes and (key word) accessories in is extremely fast. The program also allows a variety of modifications to the cabinetry which is simple and easy and I've learned how to quickly come up with a \"presentation look\" in order to limit my design time prior to a commitment on the job.
The other advantages this method provides for me is a base price (what my cost in those particular lines would be) and a detailed list of the various boxes and accessories needed to build the project. The other huge advantage is, if I can be accurate in design 20-20 produces all my installation line drawings (floor plan and elevations) including (wait for it...wait for it) - automatic dimensioning - with only a few clicks of the mouse!
So for me - the two programs complement each other...each with it's own strength and weaknesses, similar to using excel for exporting and manipulating the cut lists from eCabinets.
Mark
-
- Guru Member
- Posts: 460
- Joined: Thu, May 19 2005, 3:15PM
- Location: Palm Springs, Ca
- Contact:
Dan/Brian,
>>Brian--you need to move out to Palm Springs with Peter Walsh for the\"big money\" customers <<
Or Malibu, or La Jolla, or Carmel, or Bev Hills, etc.
'Course, You could just mail into those zip codes with good looking flyers filled with pix of your work.
By the way Mark, really nice room.
regards to all,
>>Brian--you need to move out to Palm Springs with Peter Walsh for the\"big money\" customers <<
Or Malibu, or La Jolla, or Carmel, or Bev Hills, etc.
'Course, You could just mail into those zip codes with good looking flyers filled with pix of your work.
By the way Mark, really nice room.
regards to all,
-
- Wizard Member
- Posts: 5852
- Joined: Thu, Jul 28 2005, 10:18AM
- Company Name: Dan Epps
- Country: UNITED STATES
- Location: Rocky Face GA
Re:
I hear they are going to be building 6 or 8 new mansions in Malibu as soon as fire season is overPeter Walsh wrote:Dan/Brian,
>>Brian--you need to move out to Palm Springs with Peter Walsh for the"big money" customers <<
Or Malibu, or La Jolla, or Carmel, or Bev Hills, etc.
'Course, You could just mail into those zip codes with good looking flyers filled with pix of your work.
By the way Mark, really nice room.
regards to all,
La Jolla? You have to have one leg shorter than the other just to stand up straight with the hillside homes there Of course the big challenge in La Jolla would be getting the job installed and being paid for it before the house falls into the ocean. Just don't take any jobs there during rainy season.
-
- Guru Member
- Posts: 460
- Joined: Thu, May 19 2005, 3:15PM
- Location: Palm Springs, Ca
- Contact: