10 Ft Bench for restaurant

Moderators: Jason Susnjara, Clint Buechlein

Post Reply
George Davidson
eCabinets Beta Tester
Posts: 1585
Joined: Tue, May 17 2005, 1:16PM
Location: Norwood Pa.

10 Ft Bench for restaurant

Post by George Davidson »

Looking for help on a price
It will be paint grade
10' x 20\" x 20\" D
Wall 3/4\"
Back 1/4\"
Partition 1/4\"
Attachments
B 2-9-07 Wed.jpg
B 2-9-07 Wed.jpg (79.28 KiB) Viewed 7854 times
Brian Shannon
eCabinets Beta Tester
Posts: 979
Joined: Thu, May 19 2005, 10:50PM
Location: Los Alamos, CA

Post by Brian Shannon »

I would go about $2000. but make it ALL out of 3/4\" material. You don't want a call-back on this one!
George Davidson
eCabinets Beta Tester
Posts: 1585
Joined: Tue, May 17 2005, 1:16PM
Location: Norwood Pa.

Post by George Davidson »

Brian Thank You
I started out with all 3/4
put with it being 10' long
I was going to use 3/4 poplar and 1/4 plywood sides 3/4 plywood
Mike Seisser
eCabinets Beta Tester
Posts: 544
Joined: Wed, Feb 22 2006, 11:40PM
Company Name: NCB Inc.
Country: UNITED STATES

Re:

Post by Mike Seisser »

Brian Shannon wrote:I would go about $2000. but make it ALL out of 3/4" material. You don't want a call-back on this one!
cosign
Proper Planning Prevents Poor Production.
George Davidson
eCabinets Beta Tester
Posts: 1585
Joined: Tue, May 17 2005, 1:16PM
Location: Norwood Pa.

Post by George Davidson »

They said all they have for the bench is $500.00??
For that I could make it out of 3/4\" CDX! (Bad 2 sides)
DanEpps
Wizard Member
Posts: 5852
Joined: Thu, Jul 28 2005, 10:18AM
Company Name: Dan Epps
Country: UNITED STATES
Location: Rocky Face GA

Re:

Post by DanEpps »

George Davidson wrote:They said all they have for the bench is $500.00??
For that I could make it out of 3/4" CDX! (Bad 2 sides)
That is a customer you don't need! Let them make it themselves for $500.
DaleKern
Senior Member
Posts: 122
Joined: Wed, Oct 26 2005, 12:40PM
Location: Manhattan, Illinois
Contact:

Post by DaleKern »

George,

$500??? I'd print out the ecab rendering and tell them that is all you get for $500 - $1,500 more and you get to have a seat...

Dale
I have no business being in this business...

http://www.dalekern.com
Dan Gilleece
Junior Member
Posts: 34
Joined: Mon, Oct 16 2006, 10:18PM

Re:

Post by Dan Gilleece »

George Davidson wrote:They said all they have for the bench is $500.00??
For that I could make it out of 3/4" CDX! (Bad 2 sides)
With a Skil saw, Liquid Nails, 1" staples, and galvanized T-hinges from Home Depot. Standard restaurant grade, I'm afraid. (I just quoted matching some existing booth seat boxes made exactly this way). If they have fancier tastes, they need a fancier budget. Candyapple red metalflake naugahyde extra.
Post Reply