THM.exe APPLICATION ERROR

Discuss Thermwood 3-axis Machinery, Controller, and Software.

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Jim Bullis

Post Reply
Steve Detina
Junior Member
Posts: 80
Joined: Wed, Jul 20 2005, 7:29AM
Company Name: Silhouette Custom Cabinets
Country: CANADA
Location: Hamilton, Ontario

THM.exe APPLICATION ERROR

Post by Steve Detina »

When I shut down the thermwood software I am getting the following error:

The instruction @ \"0x77f83147\" referenced memory @ \"0x05334574\" the memory could not be read

Click on OK to terminate the program

This has begun since I have upgraded to the latest version of rolling nest.
Bill Rutherford
eCabinets Beta Tester
Posts: 386
Joined: Tue, May 10 2005, 5:23AM
Location: Lancaster, NH
Contact:

Post by Bill Rutherford »

I am getting the same error, also after the RN upgrade.

Bill R
Nick M Singer
Guru Member
Posts: 828
Joined: Fri, Jun 17 2005, 12:23AM
Location: South Africa

Post by Nick M Singer »

Dont worry you are not alone and its not related to Rolling nest V4.6whatever. I have had the same error on shut down since I got my machine and through every upgrade thereafter.
Jason Susnjara
Thermwood Team
Posts: 1721
Joined: Tue, May 10 2005, 1:26PM
Location: Thermwood
Contact:

Post by Jason Susnjara »

Hi,

Nick is correct. We have had this error since we went to Windows 2000 for the operating system. This does not or affect anything with the controller or the software.

thanks,
Post Reply