Miter folding tool

Roger Erismann · Post by **Roger Erismann** » Wed, Mar 14 2007, 11:14PM

How can I get this profile loaded into the modeler so I can cut with it....using e-cabs

we want to mitre a whole bunch of panels and I was thinking that we could upload a DXF of the tool and then use the parts editor...(after creating the tool)

Am I wrong here....is there a better way....given my resources(e-cabs and a thermwood router)

I will post on the software forum also

Thanks

Michael Yeargain · Post by **Michael Yeargain** » Thu, Mar 15 2007, 5:27AM

Here's a link for a chamfer bit posted by another member in the tools forum.

http://www.thermwood.com/forums/download.php?id=650

Hope this helps.

Roger Erismann · Post by **Roger Erismann** » Thu, Mar 15 2007, 5:54AM

That is the question....do I have to model the profile exactly?

The CNC operator said he can let the profile modeler know we have \"the bit\" when running cuts through the profile modeler...then make the cut

Justin D Melhiser · Post by **Justin D Melhiser** » Thu, Mar 15 2007, 8:06AM

Roger

You can run that tool as a custom tool in one pass.