Hi,
I have a tall oven cabinet that I added fixed shelfs to. Same settings as the full top but the dados don't show. Full top , same settings dados show.
Checked and rechecked settings. Do I have to put a inset setting for fixed shelfs to show dados in cab sides?
Thanks
Ted
Fixed shelf dado?
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
Forrest Chapman
- eCabinets Beta Tester
- Posts: 1236
- Joined: Mon, May 30 2005, 2:26PM
- Location: Anderson SC.
- Contact:
Ted,
Try taking the cab back into shelf editor and left click on the shelf to highlight green. Then go to construction settings and if everything is just so then hit OK. To make changes to existing shelves or partitions you have to highlight them and be in the respective editor. Hope this helps.
Forrest
Try taking the cab back into shelf editor and left click on the shelf to highlight green. Then go to construction settings and if everything is just so then hit OK. To make changes to existing shelves or partitions you have to highlight them and be in the respective editor. Hope this helps.
Forrest