Pulling programs off of a network

Discuss Thermwood 3-axis Machinery, Controller, and Software.

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Jim Bullis

Post Reply
Matt Quarles
New Member
Posts: 18
Joined: Thu, Oct 05 2006, 10:39AM

Pulling programs off of a network

Post by Matt Quarles »

I'm trying to set up a system for operators to load files off of a network for security issues with part revisions and such. Is there anyone else out there doing this? When we try to load a program it will only let us access the hard drive on the machine and not go up any farther in the network tree.
thanks in advance
Michael S Murray
eCabinets Beta Tester
Posts: 933
Joined: Tue, May 17 2005, 2:48PM
Location: Logansport, In
Contact:

Post by Michael S Murray »

Hi Matt, this is out of my expertiese, But I do have mine set up where I can access the c-drive of my design computer from my machine over a network. I guess if you had more than one design computer you could access them all using the same setup. You will need a network set up, router and data cables between all.As far as the particulars,WELL, I hire that done!(no time or real interest)
















Hope this helps get you started
Mike Murray
Versatile Cabinet & Solid Surface
mike@versatilecabinet.com
http://www.versatilecabinet.com
Mark Hesketh
Guru Member
Posts: 366
Joined: Fri, Aug 25 2006, 9:12AM
Company Name: Paris Kitchens
Country: CANADA
Location: Paris, ontario

Post by Mark Hesketh »

we store all of our files on a server directory, which is then accessed from the controller to load the programs. We have never had a problem with this, so it shouldn't be difficult (meaning that if there was even the slightest bit of difficulty, we would have found it). so far as i know, as long as the drive is shared, and the controller has permissions set up to access the server, there shouldn't be a problem.
Ryan Hochgesang

Post by Ryan Hochgesang »

As Michael has mentioned it is certainly possible to access files through a network on another PC, from your Thermwood control. If you contact us at Thermwood we can give you some input on this subject, but it is recommended that you find a locate IT guy who can come in and work with you on this, due to the fact this is a whole profession in itself.
Nick M Singer
Guru Member
Posts: 828
Joined: Fri, Jun 17 2005, 12:23AM
Location: South Africa

Post by Nick M Singer »

I have no problem transferring files over our network and it is a simple matter of setting up a normal Windows network. I also run the control software on our CS40 from my workstation using Tight VNC, just cant push START though.
Daniel Vonderheide
Thermwood Team
Posts: 361
Joined: Wed, May 17 2006, 11:25AM
Location: Thermwood

Post by Daniel Vonderheide »

Matt,

I'm pretty sure that this is the information you are looking for. This is in addition to all the information already provided. Any files that you want to load and run on the machine have to be stored in the \"D:Data\" drive of the machine. If the file is located anywhere else on the machine or on the network, you cannot load it and run it through the Thermwood software.
Michael Kowalczyk
eCabinets Beta Tester
Posts: 284
Joined: Tue, May 10 2005, 11:35AM
Location: Houston, Texas

Post by Michael Kowalczyk »

Hey Daniel or Ryan,

Is it fair to mention that if you have your file multiple folders deep and there are too many characters (file name is too long) that you will get an error. I forgot how many, i think it was around 23 but I try to keep them only 2-3 folders deep and if there is an error I just bring it to the part folder and then put it back when done.

Is any one running their controller on a network having issues with virus protection slowing it down? If yes please tell us what you are using. If no, also please tell us what you are using.
I keep mine off the network and use a USB drive to bring my nc or twd files over to it. it's an automatic back up unless I modify the file in the controller which is typically only the Z shift #.

Thanks,
Michael Kowalczyk, GM

HP-Elite Quad Core Q6700-4 MB ram, Nvidia GeForce 512 MB Dual HP 22" flat panels, Windows 7 ultimate 64bit SP1
Ryan Hochgesang

Post by Ryan Hochgesang »

It is best to keep new directories as shallow as possible to D:\\Data. Yes, you can get errors if files are saved to deep into the system. It is recommended to keep files names as short as possible (under 20 characters, no spaces, etc...) or THM software may crash upon loading and running.
Post Reply