I couldn't get the search engine to work this morning so, if anyone could help...
In custom layout/ detail room/ elevation view I'm trying to move a 2\" filler panel to a particular distance off the side wall. When I click on the filler and enter the value in one of the dimension fields (left or right) at the left of the screen it enters a value that is 19/32\" greater than what I typed. If I enter 36\" it displays 36 19/32\". 38\" gives me 38 19/32\", etc... Any ideas why?
Thanks in advance,
Steve
Help please moving cabinet in detail room
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- Junior Member
- Posts: 82
- Joined: Wed, May 24 2006, 1:52PM
- Location: Beech Island, SC
- Contact:
-
- Wizard Member
- Posts: 4723
- Joined: Mon, May 09 2005, 7:33PM
- Company Name: Double E Cabinets
- Country: UNITED STATES
- Location: Amarillo, TX
-
- Senior Member
- Posts: 106
- Joined: Sun, May 07 2006, 9:24PM
- Location: Huron, KS
- Contact:
Steve,
I run into this a lot. I have found the easiest solution is to enter the odd dimension into the move increment box for objects, in this case the 19/32, then hold the shift key and hit the arrow button for whichever direction you need the object to move.
I run into this a lot. I have found the easiest solution is to enter the odd dimension into the move increment box for objects, in this case the 19/32, then hold the shift key and hit the arrow button for whichever direction you need the object to move.
Gene Kimmi
Lenovo W540 windows 8.1 Pro
Intel Core i-7 4800MQ @ 2.7GHz 8 GB ram
Intel HD & NVIDIA Quadro K2100M Graphics
Samsung 256 SSD Drive
Lenovo W540 windows 8.1 Pro
Intel Core i-7 4800MQ @ 2.7GHz 8 GB ram
Intel HD & NVIDIA Quadro K2100M Graphics
Samsung 256 SSD Drive
-
- Junior Member
- Posts: 82
- Joined: Wed, May 24 2006, 1:52PM
- Location: Beech Island, SC
- Contact:
-
- Wizard Member
- Posts: 4723
- Joined: Mon, May 09 2005, 7:33PM
- Company Name: Double E Cabinets
- Country: UNITED STATES
- Location: Amarillo, TX