Not sure what happened here...
I was working in ecabinets and noticed that for some reason the program had started placing the cabinets on the wall backwards. At first I thought they were just missing doors, but they are there, as well as the shelves and shelf holes (but not visible because of the back). I only realized that the cabinets are backwards when I noticed the crown moulding tight against the wall.
Just thought I'd post a note so perhaps someone can figure out what is going on here, and what is causing it.
Attached is a screenshot as well as the file for this kitchen design in progress.
Placing wall cabinets on wall backwards....
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
Placing wall cabinets on wall backwards....
- Attachments
-
- backwards cabinets.esj
- (3.26 MiB) Downloaded 294 times
-
- backwards1.jpg (72.4 KiB) Viewed 5910 times
-
- Wizard Member
- Posts: 4723
- Joined: Mon, May 09 2005, 7:33PM
- Company Name: Double E Cabinets
- Country: UNITED STATES
- Location: Amarillo, TX
Re: Placing wall cabinets on wall backwards....
Mark
The eCab guys probably need to look at this. The same thing happens when I try to place cabinet to that wall. The other walls work properly.
Kerry
The eCab guys probably need to look at this. The same thing happens when I try to place cabinet to that wall. The other walls work properly.
Kerry
-
- eCabinets Beta Tester
- Posts: 923
- Joined: Wed, Apr 05 2006, 5:50PM
- Location: Marion, Ar.
- Contact:
Re: Placing wall cabinets on wall backwards....
Take the wall and reverse the build direction and then switch it back and everything works ok.
- Attachments
-
- build direction.jpg (50.02 KiB) Viewed 5837 times
Damon Nabors
-
- Wizard Member
- Posts: 4723
- Joined: Mon, May 09 2005, 7:33PM
- Company Name: Double E Cabinets
- Country: UNITED STATES
- Location: Amarillo, TX
Re: Placing wall cabinets on wall backwards....
Damon,
I had tried that and just tried again to double check and it still doesn't work for me. I can pull the cabinet outline through the back of the wall and it will position correctly but if I move the cursor it flips again.
If I go to Detail room and (without playing with the build direction of the wall) remove all his cabinets and then try to place a cabinet then cabinets place properly
Kerry
I had tried that and just tried again to double check and it still doesn't work for me. I can pull the cabinet outline through the back of the wall and it will position correctly but if I move the cursor it flips again.
If I go to Detail room and (without playing with the build direction of the wall) remove all his cabinets and then try to place a cabinet then cabinets place properly
Kerry
-
- eCabinets Beta Tester
- Posts: 923
- Joined: Wed, Apr 05 2006, 5:50PM
- Location: Marion, Ar.
- Contact:
Re: Placing wall cabinets on wall backwards....
Kerry, I saved the 3 upper cabinets, deleted them, then switched build direction on that wall and the left wall, switched the walls back and then replaced the cabinets. They also placed correctly in elevation view.
Damon Nabors
-
- Wizard Member
- Posts: 4723
- Joined: Mon, May 09 2005, 7:33PM
- Company Name: Double E Cabinets
- Country: UNITED STATES
- Location: Amarillo, TX
Re: Placing wall cabinets on wall backwards....
OK,
I wasn't removing all three reversed cabinet and when I try to place the center cabinet it is snapping to the back of the cabinet which reverses it.
Just remove all three backward cabinets and replace the using align to back. You don't even have to reverse the build direction of the wall.
My guess is that one of the cabinets got placed backward by accident and then the others are snapping to the back of that cabinet.
Kerry
I wasn't removing all three reversed cabinet and when I try to place the center cabinet it is snapping to the back of the cabinet which reverses it.
Just remove all three backward cabinets and replace the using align to back. You don't even have to reverse the build direction of the wall.
My guess is that one of the cabinets got placed backward by accident and then the others are snapping to the back of that cabinet.
Kerry
-
- eCabinets Beta Tester
- Posts: 923
- Joined: Wed, Apr 05 2006, 5:50PM
- Location: Marion, Ar.
- Contact:
Re: Placing wall cabinets on wall backwards....
I was just fixin (thats southern talk for you that don't know) to say that, I went back and tried it again without reverse and it still worked.
Damon Nabors
Re: Placing wall cabinets on wall backwards....
Thanks guys,
I am not sure how that first cabinet got placed backwards, but your right Kerry, once one cabinet is backwards, every thing else after going to snap to it, and that is probably what happened. I don't think it was something I did, but you never know. Anyway if it is a bug in the program I thought I should let someone know about it, If it's me then there is nothing to worry about.... Thanks for the great support guys.
I am not sure how that first cabinet got placed backwards, but your right Kerry, once one cabinet is backwards, every thing else after going to snap to it, and that is probably what happened. I don't think it was something I did, but you never know. Anyway if it is a bug in the program I thought I should let someone know about it, If it's me then there is nothing to worry about.... Thanks for the great support guys.