eCabinet software

Discuss Thermwood 3-axis Machinery, Controller, and Software.

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Jim Bullis

Ioanna Farmaki
New Member
Posts: 10
Joined: Mon, Jan 21 2008, 6:33AM

eCabinet software

Post by Ioanna Farmaki »

3 weeks ago I filled up an application form from the official site of Thermwood to be able and get the eCabinet software.
Till today nothing came from these people.
Is there something to do more in order to get this soft??
Many thanks :)
Todd Miller

Re: eCabinet software

Post by Todd Miller »

Ioanna,
Give us a call so we can verify your shipping info.

Todd Miller
1.800.221.3865
x330
Todd Miller

Re: eCabinet software

Post by Todd Miller »

Ioanna,
I think because you live in Greece, may be the reason for the slow delivery. I will check our people here to see if our european dealer can help you out. Sorry for the delay.
Ioanna Farmaki
New Member
Posts: 10
Joined: Mon, Jan 21 2008, 6:33AM

Re: eCabinet software

Post by Ioanna Farmaki »

Dear Todd,
Thank you so much for your kind and imediate attention. Today I received an email with a registration code together with a text saying:
Below is your new Registration Code(s) for eCabinet Systems. Please retain this Registration Code for future reference. You will need it to fully activate and install eCabinet Systems (by copying and pasting the code into the software at the prompt).
Now could you please guide me to the next steps? Do I have to go to a link and activate something?
Sorry for the inconvenience but I am not so experienced in doing things like that :roll: :)
Many thanks again

Ioanna
Todd Miller

Re: eCabinet software

Post by Todd Miller »

Ioanna,
Right now you will need to wait until you receive the Ecabinets Version 5.0 or Version 5.1 CD. At that point you will install the software. You will need to enter the registration code you just received to complete the installation. I am still in the process of locating the correct person to get you a disk. I will find out today and get the disk to you ASAP. Again, we are sorry for the delay.
Todd Miller

Re: eCabinet software

Post by Todd Miller »

Ioanna,
I understand that you have spoken with Jason, and that he has taken care of having our European dealer send you a disk. If you need further assistance for installation, when you receive the disk, give us a call and we can help you out. Thanks!
Ioanna Farmaki
New Member
Posts: 10
Joined: Mon, Jan 21 2008, 6:33AM

Re: eCabinet software

Post by Ioanna Farmaki »

Todd,
I sent the post before receiving Jason's kind help.
I do thank you both very very much indead!
All my best,

Ioanna
Ioanna Farmaki
New Member
Posts: 10
Joined: Mon, Jan 21 2008, 6:33AM

Re: eCabinet software

Post by Ioanna Farmaki »

I am sorry to come back and ask for your help, as there are nearly 4 months since I first asked for the
eCabinet software, but nothing happened till now!!
I am afraid something went wrong - I have no idea what exactly. :(
Emails, private messages, posts,...
What can I do more??
Thank you.
Todd Miller

Re: eCabinet software

Post by Todd Miller »

Ionna,
Have you recieved the software yet?
Ioanna Farmaki
New Member
Posts: 10
Joined: Mon, Jan 21 2008, 6:33AM

Re: eCabinet software

Post by Ioanna Farmaki »

No, I haven't received anything :( :(
Todd Miller

Re: eCabinet software

Post by Todd Miller »

I have sent you a Private message with the shipping information that we have on file for you. Check it to make sure everything in correct.
Ioanna Farmaki
New Member
Posts: 10
Joined: Mon, Jan 21 2008, 6:33AM

Re: eCabinet software

Post by Ioanna Farmaki »

Everything in the information is correct!
Thank you
Todd Miller

Re: eCabinet software

Post by Todd Miller »

Thank you. I will find out what is needed and keep you posted.
Todd Miller

Re: eCabinet software

Post by Todd Miller »

Ioanna,
FYI. I have contacted our Dealer in the UK. He has not responded yet, but I have ask him to confirm the status of your shipment. I will keep you posted.
Ioanna Farmaki
New Member
Posts: 10
Joined: Mon, Jan 21 2008, 6:33AM

Re: eCabinet software

Post by Ioanna Farmaki »

Thank you, and I am sorry for all this trouble!
Post Reply