Up/down spiral here we go again

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal

Post Reply
Mark Fese
Junior Member
Posts: 64
Joined: Tue, Aug 22 2006, 3:46PM
Location: Elizabeth Lake Ca.

Up/down spiral here we go again

Post by Mark Fese »

Received the email from thermwood that all Southeast router bits have free shipping, Thats great so I need a few 3/8" 3 flute compression bits and again they don't tell you what the upcut length is, Thats important! can anybody at thermwood tell me what the upcut length is on a Southeast bit # SESUD750 is? so I can take advantage of the free shipping thanks Mark
Free Lance eCabinet Designers
ACD All Cabinet Design
www.acdallcabinetdesign.com
Mark Fese
Junior Member
Posts: 64
Joined: Tue, Aug 22 2006, 3:46PM
Location: Elizabeth Lake Ca.

Re: Up/down spiral here we go again

Post by Mark Fese »

And maybe update the members store site to show all the upcut lengths?
Free Lance eCabinet Designers
ACD All Cabinet Design
www.acdallcabinetdesign.com
Will Williamson
Guru Member
Posts: 449
Joined: Thu, Dec 08 2005, 6:10PM
Company Name: Williamson Finewoodwork
Country: UNITED STATES
Location: Capac MI
Contact:

Re: Up/down spiral here we go again

Post by Will Williamson »

Call up Southeast and have them send you catalog. Then call the rest of the router bit companies on the list and do the same at the same time talk to the sales rep and get recommendation tell them you are buying through Thermwood they are more than happy to help you
Will

http://www.willmade.com

KEG/Intel Core i 7 CPU K875 @ 2.93 GHZ/12G Ram
Dual boot XP PRO/Windows 7 Nvidia Quatro 600 1Gig Ram
Eric Shearn

Re: Up/down spiral here we go again

Post by Eric Shearn »

Hello Mark,

I am working on adding the upcut lengths. I apologize for any inconvenience this may have caused. What upcut length are you looking for? If you have any questions please call or email me.

Eric Shearn
eric.shearn@thermwood.com
Mark Fese
Junior Member
Posts: 64
Joined: Tue, Aug 22 2006, 3:46PM
Location: Elizabeth Lake Ca.

Re: Up/down spiral here we go again

Post by Mark Fese »

Thanks for responding Eric, what I was looking for was a 3/8" dia bit with a 1/4" upcut? and trying to take advantage of the free shipping for southeast bits that ends Wed. 4-23 ?
Free Lance eCabinet Designers
ACD All Cabinet Design
www.acdallcabinetdesign.com
Eric Shearn

Re: Up/down spiral here we go again

Post by Eric Shearn »

Hello Mark,

From Southeast you will need to get a 3/16" upcut, they do not have 1/4".
These are the 3/16" upcut tool numbers SESUD551 or SESMDUD550-316. If you have any other questions please let me know.

Eric
Mark Fese
Junior Member
Posts: 64
Joined: Tue, Aug 22 2006, 3:46PM
Location: Elizabeth Lake Ca.

Re: Up/down spiral here we go again

Post by Mark Fese »

Eric, do you know the diameter of those 2 bits?
Free Lance eCabinet Designers
ACD All Cabinet Design
www.acdallcabinetdesign.com
Eric Shearn

Re: Up/down spiral here we go again

Post by Eric Shearn »

Hello Mark,

Those two part numbers are for 3/8" diameter bits.
Post Reply