IWF 2008
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- eCabinets Beta Tester
- Posts: 923
- Joined: Wed, Apr 05 2006, 5:50PM
- Location: Marion, Ar.
- Contact:
-
- Wizard Member
- Posts: 5852
- Joined: Thu, Jul 28 2005, 10:18AM
- Company Name: Dan Epps
- Country: UNITED STATES
- Location: Rocky Face GA
Re: IWF 2008
I doubt that I will get to go. I really hate not getting to see everyone too.
-
- eCabinets Beta Tester
- Posts: 923
- Joined: Wed, Apr 05 2006, 5:50PM
- Location: Marion, Ar.
- Contact:
Re: IWF 2008
Dan, get a nerve block and a stretcher and you'll be fine. Or better yet, Mike said he was willing to fix you up on the CNC.
Damon Nabors
-
- Guru Member
- Posts: 622
- Joined: Fri, May 20 2005, 6:48PM
- Company Name: Classic Cabinetry
- Location: Albany Western Australia
- Contact:
Re: IWF 2008
What, Dan the man not going to be there....
Travelling half way around the world to meet the legend..
What a disappointment.
No worries Dan. Look after your health first. These fairs are fairly energy draining.
Maybe Jason can set you up with a recliner chair and you can look after Ecabinet enquires?
Regards
Neville
Travelling half way around the world to meet the legend..
What a disappointment.
No worries Dan. Look after your health first. These fairs are fairly energy draining.
Maybe Jason can set you up with a recliner chair and you can look after Ecabinet enquires?
Regards
Neville
Neville Australia
-
- Wizard Member
- Posts: 5852
- Joined: Thu, Jul 28 2005, 10:18AM
- Company Name: Dan Epps
- Country: UNITED STATES
- Location: Rocky Face GA
Re: IWF 2008
You guys are making me laugh again...and it hurts.
-
- Wizard Member
- Posts: 5852
- Joined: Thu, Jul 28 2005, 10:18AM
- Company Name: Dan Epps
- Country: UNITED STATES
- Location: Rocky Face GA
Re: IWF 2008
To make matters worse, today is employee-guest day at the country club my son works at. He has been looking forward to taking me golfing there ever since he's been working there. I'm going, even if it means just riding in the cart (anyone that has ever seen me play golf knows that its better if I just stay in the cart anyway ).
-
- eCabinets Beta Tester
- Posts: 923
- Joined: Wed, Apr 05 2006, 5:50PM
- Location: Marion, Ar.
- Contact:
Re: IWF 2008
Yeah, Golfing is one of those sports that you almost have to play every day in order to stay on top of your game. I used to play regularly but I was never any good. My wife likes bowling. I always said if I could trade my golf score with my bowling score, I would be alright.
Be careful if you decide to play. Tiger Woods is out for the season because he decided to play on a bad knee. It is not worth further injuring yourself. I would just stay close to the Beer Cart, after a few, the pain will ease up.
Be careful if you decide to play. Tiger Woods is out for the season because he decided to play on a bad knee. It is not worth further injuring yourself. I would just stay close to the Beer Cart, after a few, the pain will ease up.
Damon Nabors
-
- Wizard Member
- Posts: 5852
- Joined: Thu, Jul 28 2005, 10:18AM
- Company Name: Dan Epps
- Country: UNITED STATES
- Location: Rocky Face GA
Re: IWF 2008
Well, I actually played (or pretended to play) a couple of holes. It was worth it just for the ride around the course. It is a very beautiful course, set at the base of a mountain and utilizing the natural lay of the land.
Now I'm back home and it is about time to hit the recliner for a while.
Now I'm back home and it is about time to hit the recliner for a while.
-
- eCabinets Beta Tester
- Posts: 1119
- Joined: Tue, May 10 2005, 9:36PM
- Company Name: Corlane Custom Cabinetry LLC
- Country: UNITED STATES
- Location: Carnesville, GA
- Contact:
Re: IWF 2008
I'll be there. I was planning on spending the whole show at the Thermwood booth looking at the machines, deciding which one I want. But, I jumped the gun and just bought one (due to arrive later this month, I'm excited!)... so, I guess I'll spend the whole show a the Thermwood booth looking at the machines.
http://www.corlanecabinetry.com
Intel Core i7-5820 3.3GHz, 16GB RAM, NVidia Quadro K2200 4GB, Windows 8.1 Pro 64 bit
CS-41 4x8
CS-45 5x12
Intel Core i7-5820 3.3GHz, 16GB RAM, NVidia Quadro K2200 4GB, Windows 8.1 Pro 64 bit
CS-41 4x8
CS-45 5x12
-
- eCabinets Beta Tester
- Posts: 923
- Joined: Wed, Apr 05 2006, 5:50PM
- Location: Marion, Ar.
- Contact:
Re: IWF 2008
Damon Nabors
-
- Wizard Member
- Posts: 5852
- Joined: Thu, Jul 28 2005, 10:18AM
- Company Name: Dan Epps
- Country: UNITED STATES
- Location: Rocky Face GA
Re: IWF 2008
Congrats on the new "baby" Jeremy!!! Has Windstream gotten around to extending DSL out your way yet? If not, its too bad. You have a 21st century cabinet shop with 18th internet.
-
- eCabinets Beta Tester
- Posts: 1119
- Joined: Tue, May 10 2005, 9:36PM
- Company Name: Corlane Custom Cabinetry LLC
- Country: UNITED STATES
- Location: Carnesville, GA
- Contact:
Re: IWF 2008
Thanks! Yeah, I'm using relatively high-speed internet now, but no thanks to Windstream! This is one of those portable USB modems that works with cell phone towers (Verizon in this case), and compared to the ol' string and cans, it's blazing fast! I'm lovin' it. Well, at $60 a month for a 5GB limit it ain't perfect, but it is usable, where the dialup just plain wasn't useable. So I called Windstream and told them to take a hike, both with the dialup internet AND the home phone service, which was costing about $70 a month... so it works out pretty well I think.
Here's to a speedy recovery Dan, hope to see you at IWF!
Of course, I'm looking forward to meeting many other eCabbers at the show. Won't be much for me to look at otherwise since I've blown my budget!
Here's to a speedy recovery Dan, hope to see you at IWF!
Of course, I'm looking forward to meeting many other eCabbers at the show. Won't be much for me to look at otherwise since I've blown my budget!
http://www.corlanecabinetry.com
Intel Core i7-5820 3.3GHz, 16GB RAM, NVidia Quadro K2200 4GB, Windows 8.1 Pro 64 bit
CS-41 4x8
CS-45 5x12
Intel Core i7-5820 3.3GHz, 16GB RAM, NVidia Quadro K2200 4GB, Windows 8.1 Pro 64 bit
CS-41 4x8
CS-45 5x12
-
- Junior Member
- Posts: 31
- Joined: Sat, Aug 18 2007, 9:43PM
- Location: Bonifay, FL
Re: IWF 2008
I'm going. You guys don't know me, but I am looking forward to meeting all of you. I will probably spend most of my time at the Thermwood booth looking at the machines. I hope to get one soon. I have had ecabinets for a long time, I just haven't taken the time to fully learn the program yet. I work with it in my spare time which isn't very often. I am getting close to allowing some of it to sink in. I am excited about seeing a machine cut a cabinet. I hope that you wizards and seniors will allow me to get in on the fun. See y'all at the show!!!!!
WE'RE GOING TO THE FAIR!!!!
WE'RE GOING TO THE FAIR!!!!
Neal Reeves
Country Cabinets, Inc.
Bonifay, FL
Country Cabinets, Inc.
Bonifay, FL
-
- Guru Member
- Posts: 622
- Joined: Fri, May 20 2005, 6:48PM
- Company Name: Classic Cabinetry
- Location: Albany Western Australia
- Contact:
Re: IWF 2008
It seem like its going to be a bit hit and miss meeting up with each other. Why don't we all try and meet at say noon and 4pm each day. That way who ever is around should catch up with a few forum users.
What would be really neat is if a senior programmer could give the users a foretaste of what the next version of Ecabinets has. Maybe there is a small meeting room we could use for a hour or so.
This would be good PR and make us feel part of the Thermwood family.
Just a thought Justin.
Regards
Neville
What would be really neat is if a senior programmer could give the users a foretaste of what the next version of Ecabinets has. Maybe there is a small meeting room we could use for a hour or so.
This would be good PR and make us feel part of the Thermwood family.
Just a thought Justin.
Regards
Neville
Neville Australia
-
- Wizard Member
- Posts: 1896
- Joined: Wed, May 18 2005, 7:54PM
- Company Name: Milltech Millworks Ltd.
- Country: CANADA
- Location: Edmonton, Alberta
- Contact:
Re: IWF 2008
Congrats on the new machine Jeremy.