need shower Bases

Moderators: Jason Susnjara, Clint Buechlein

Post Reply
Gary Puckett
Wizard Member
Posts: 1324
Joined: Mon, May 19 2008, 1:39PM
Company Name: The Woodworkery
Location: Saint Charles, Missouri
Contact:

need shower Bases

Post by Gary Puckett »

Does anyone know of a site that has shower bases that can be used in eCabinets ?

I am just starting to design a bathroom remodel and the client wants to move the exsisting shower stall to another wall.

Gary
HP Pavilion
Vista home Premium 64bit S. pack 2
AMD Phenom-X4
9850 Quad-Core Processor
6.0GB/Go Memory
1 TB/To Hard Drive
Nividia GeForce 9800 GT
DanEpps
Wizard Member
Posts: 5852
Joined: Thu, Jul 28 2005, 10:18AM
Company Name: Dan Epps
Country: UNITED STATES
Location: Rocky Face GA

Re: need shower Bases

Post by DanEpps »

There is a tub/shower stall in Sample_HSFs if that would work or you could easily make one from a display cube.
Gary Puckett
Wizard Member
Posts: 1324
Joined: Mon, May 19 2008, 1:39PM
Company Name: The Woodworkery
Location: Saint Charles, Missouri
Contact:

Re: need shower Bases

Post by Gary Puckett »

Dan,

Yes it can be made, but it also has to be able to be purchased. Also the cost of the base has to be resonable. I'm sure anything custom would be pricey. The area where the base is going to try to go has a 45 degree short wall in the upper right hand corner.

Gary
HP Pavilion
Vista home Premium 64bit S. pack 2
AMD Phenom-X4
9850 Quad-Core Processor
6.0GB/Go Memory
1 TB/To Hard Drive
Nividia GeForce 9800 GT
DanEpps
Wizard Member
Posts: 5852
Joined: Thu, Jul 28 2005, 10:18AM
Company Name: Dan Epps
Country: UNITED STATES
Location: Rocky Face GA

Re: need shower Bases

Post by DanEpps »

Don't worry about the purchase price for your layout design, just make it to show the customer. There are plenty of options in every price range when it comes to purchasing the actual unit.

You can find a bunch on Home Depot's website to get prices and dimensions. They range from about $265 to $500.
DanEpps
Wizard Member
Posts: 5852
Joined: Thu, Jul 28 2005, 10:18AM
Company Name: Dan Epps
Country: UNITED STATES
Location: Rocky Face GA

Re: need shower Bases

Post by DanEpps »

Try the Kohler website. They have DXF and DWG files of all their products available for download.

Here is a DXF of just one of their corner showers:
9536.zip
(7.39 KiB) Downloaded 599 times
Gary Puckett
Wizard Member
Posts: 1324
Joined: Mon, May 19 2008, 1:39PM
Company Name: The Woodworkery
Location: Saint Charles, Missouri
Contact:

Re: need shower Bases

Post by Gary Puckett »

Dan,

Sorry I missed this post, thanks for the link I think I can make something work from that.

Gary
HP Pavilion
Vista home Premium 64bit S. pack 2
AMD Phenom-X4
9850 Quad-Core Processor
6.0GB/Go Memory
1 TB/To Hard Drive
Nividia GeForce 9800 GT
George Davidson
eCabinets Beta Tester
Posts: 1585
Joined: Tue, May 17 2005, 1:16PM
Location: Norwood Pa.

Re: need shower Bases

Post by George Davidson »

Hi Gary
Would you have any sizes on the pan and the walls around the pan
George Davidson
eCabinets Beta Tester
Posts: 1585
Joined: Tue, May 17 2005, 1:16PM
Location: Norwood Pa.

Re: need shower Bases

Post by George Davidson »

Here is one I made about 6 m ago
It is 4 pices drain,floor tile,grout and pan can be changed.
I set it up for 42 x 6 x 42 Pan
I put a 5/8" pitch to the drain (so if you put water into the pan it will run to the center make sure you have a pail with you :lol: )
Attachments
Bathroom Shower.zip
(125.84 KiB) Downloaded 583 times
Pictures_1.jpg
Pictures_1.jpg (86.22 KiB) Viewed 10016 times
Gary Puckett
Wizard Member
Posts: 1324
Joined: Mon, May 19 2008, 1:39PM
Company Name: The Woodworkery
Location: Saint Charles, Missouri
Contact:

Re: need shower Bases

Post by Gary Puckett »

Thanks George,

I made one out nof a display cube it turned out ok. This shower pan has to be custom made.

Gary
HP Pavilion
Vista home Premium 64bit S. pack 2
AMD Phenom-X4
9850 Quad-Core Processor
6.0GB/Go Memory
1 TB/To Hard Drive
Nividia GeForce 9800 GT
Post Reply