Guys,
Need some advise on setting the right light. I know Kerry's says that" Less is More" but there has to be a system in placing the lights. I think all the light fixtures show the same light beam, as for as eCab. goes. This project is driving me I try a light arrangement and that doesn't work so I try another, and another, Frustration sets in and I close it down and walk away
Gary
Getting the right light
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- Wizard Member
- Posts: 1324
- Joined: Mon, May 19 2008, 1:39PM
- Company Name: The Woodworkery
- Location: Saint Charles, Missouri
- Contact:
Getting the right light
HP Pavilion
Vista home Premium 64bit S. pack 2
AMD Phenom-X4
9850 Quad-Core Processor
6.0GB/Go Memory
1 TB/To Hard Drive
Nividia GeForce 9800 GT
Vista home Premium 64bit S. pack 2
AMD Phenom-X4
9850 Quad-Core Processor
6.0GB/Go Memory
1 TB/To Hard Drive
Nividia GeForce 9800 GT
-
- Guru Member
- Posts: 645
- Joined: Mon, Nov 20 2006, 3:39PM
- Company Name: Rylex Custom Cabinetry-Close
- Country: UNITED STATES
- Location: Pine Island, New York
- Contact:
Re: Getting the right light
Gary,
I have found that using the dome light gives off a very dispersed light. And the high hat light seems to give a more focused light.
I have difficulty with is sometimes as well. Don't give up though!!
-John
I have found that using the dome light gives off a very dispersed light. And the high hat light seems to give a more focused light.
I have difficulty with is sometimes as well. Don't give up though!!
-John
-
- Wizard Member
- Posts: 4723
- Joined: Mon, May 09 2005, 7:33PM
- Company Name: Double E Cabinets
- Country: UNITED STATES
- Location: Amarillo, TX
Re: Getting the right light
Gary,
Send me the job file and I will light it. If you like the lighting you will then be able to see how it was done.
Save your original file in case you don't like the way I do it.
Kerry
Send me the job file and I will light it. If you like the lighting you will then be able to see how it was done.
Save your original file in case you don't like the way I do it.
Kerry
-
- eCabinets Beta Tester
- Posts: 933
- Joined: Tue, May 17 2005, 2:48PM
- Location: Logansport, In
- Contact:
Re: Getting the right light
Kerry,
I am having some troble with renderings and lighting, can I send you a dozen or so jobs and let you do them for me
Sorry, its late, I am getting punchy and I want to go home!
I am having some troble with renderings and lighting, can I send you a dozen or so jobs and let you do them for me
Sorry, its late, I am getting punchy and I want to go home!
Mike Murray
Versatile Cabinet & Solid Surface
mike@versatilecabinet.com
http://www.versatilecabinet.com
Versatile Cabinet & Solid Surface
mike@versatilecabinet.com
http://www.versatilecabinet.com
-
- Wizard Member
- Posts: 1324
- Joined: Mon, May 19 2008, 1:39PM
- Company Name: The Woodworkery
- Location: Saint Charles, Missouri
- Contact:
Re: Getting the right light
Hey Mike,Michael S Murray wrote:Kerry,
I am having some troble with renderings and lighting, can I send you a dozen or so jobs and let you do them for me
Sorry, its late, I am getting punchy and I want to go home!
You can send me 3 or 4 of those jobs I need the work
Gary
HP Pavilion
Vista home Premium 64bit S. pack 2
AMD Phenom-X4
9850 Quad-Core Processor
6.0GB/Go Memory
1 TB/To Hard Drive
Nividia GeForce 9800 GT
Vista home Premium 64bit S. pack 2
AMD Phenom-X4
9850 Quad-Core Processor
6.0GB/Go Memory
1 TB/To Hard Drive
Nividia GeForce 9800 GT
-
- New Member
- Posts: 16
- Joined: Wed, Jan 21 2009, 4:49PM
- Company Name: The Kings Woodwright
- Country: CANADA
- Location: Brantford, ON
- Contact:
Re: Getting the right light
Could I take you up on that I've had trouble making the lighting look right on most projects. My advantage is even a so so lighting is better than what others are presenting.Kerry Fullington wrote:Gary,
Send me the job file and I will light it. If you like the lighting you will then be able to see how it was done.
Save your original file in case you don't like the way I do it.
Kerry
-
- Wizard Member
- Posts: 4723
- Joined: Mon, May 09 2005, 7:33PM
- Company Name: Double E Cabinets
- Country: UNITED STATES
- Location: Amarillo, TX
Re: Getting the right light
David,
If you want, zip your job file and send it to kerry@kerryfullington.com and I will see what I can do.
Kerry
If you want, zip your job file and send it to kerry@kerryfullington.com and I will see what I can do.
Kerry
-
- eCabinets Beta Tester
- Posts: 933
- Joined: Tue, May 17 2005, 2:48PM
- Location: Logansport, In
- Contact:
Re: Getting the right light
Sounds like your working in to a subcontacting business there Kerry...
Mike Murray
Versatile Cabinet & Solid Surface
mike@versatilecabinet.com
http://www.versatilecabinet.com
Versatile Cabinet & Solid Surface
mike@versatilecabinet.com
http://www.versatilecabinet.com