Unable to Delete Shape in Part Editor

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal

Post Reply
Nat Wheatley
eCabinets Beta Tester
Posts: 491
Joined: Wed, Apr 15 2009, 8:22PM
Company Name: Plymouth Custom Closets
Country: UNITED STATES
Location: Plympton, MA

Unable to Delete Shape in Part Editor

Post by Nat Wheatley »

I created the small circle (below) in PE and wasn't able to delete it either in 'standard' or contour mode.
Error1B.PNG
Error1B.PNG (88.69 KiB) Viewed 6223 times
http://www.plymouthcustomclosets.com

Dell Precision 490/ Intel Xeon 3.20 Ghz/3 GB RAM/ Nvidia Quadro FX 3450/ Windows XP, sp 3
Jon Kenworthy
Junior Member
Posts: 43
Joined: Thu, Mar 27 2008, 6:00PM
Company Name: darrells Carpenter Shop
Location: Marana, AZ

Re: Unable to Delete Shape in Part Editor

Post by Jon Kenworthy »

You can right click with this cabinet in the cabinet editor and select Remove Part Editor Cuts either from selected part or the entire cabinet.
Nat Wheatley
eCabinets Beta Tester
Posts: 491
Joined: Wed, Apr 15 2009, 8:22PM
Company Name: Plymouth Custom Closets
Country: UNITED STATES
Location: Plympton, MA

Re: Unable to Delete Shape in Part Editor

Post by Nat Wheatley »

Thanks, Jon, I eventually did come across that button. If it's not there already, it might make sense for that option to be available in PE as well.
http://www.plymouthcustomclosets.com

Dell Precision 490/ Intel Xeon 3.20 Ghz/3 GB RAM/ Nvidia Quadro FX 3450/ Windows XP, sp 3
JohnLashuay
Guru Member
Posts: 645
Joined: Mon, Nov 20 2006, 3:39PM
Company Name: Rylex Custom Cabinetry-Close
Country: UNITED STATES
Location: Pine Island, New York
Contact:

Re: Unable to Delete Shape in Part Editor

Post by JohnLashuay »

Nat Wheatley wrote:Thanks, Jon, I eventually did come across that button. If it's not there already, it might make sense for that option to be available in PE as well.
Nat, it is available in the PE. You can remove individual geometry cuts by clicking on the pencil and choosing option "Geometry Cut" then hover over the cut you wish to remove and it will be highlighted. Left click it and only that cut will be removed.

-John
Rylex Custom Cabinetry & Closets
http://www.rylexonline.com
Thermwood CS 43
Nat Wheatley
eCabinets Beta Tester
Posts: 491
Joined: Wed, Apr 15 2009, 8:22PM
Company Name: Plymouth Custom Closets
Country: UNITED STATES
Location: Plympton, MA

Re: Unable to Delete Shape in Part Editor

Post by Nat Wheatley »

John, I just tried that and it works great. Not clear on why I didn't try to use it before. Thanks.
http://www.plymouthcustomclosets.com

Dell Precision 490/ Intel Xeon 3.20 Ghz/3 GB RAM/ Nvidia Quadro FX 3450/ Windows XP, sp 3
JohnLashuay
Guru Member
Posts: 645
Joined: Mon, Nov 20 2006, 3:39PM
Company Name: Rylex Custom Cabinetry-Close
Country: UNITED STATES
Location: Pine Island, New York
Contact:

Re: Unable to Delete Shape in Part Editor

Post by JohnLashuay »

Nat Wheatley wrote:Not clear on why I didn't try to use it before.
I find myself wondering the same thing!! :oops:
Rylex Custom Cabinetry & Closets
http://www.rylexonline.com
Thermwood CS 43
DanEpps
Wizard Member
Posts: 5852
Joined: Thu, Jul 28 2005, 10:18AM
Company Name: Dan Epps
Country: UNITED STATES
Location: Rocky Face GA

Re: Unable to Delete Shape in Part Editor

Post by DanEpps »

JohnLashuay wrote:
Nat Wheatley wrote:Not clear on why I didn't try to use it before.
I find myself wondering the same thing!! :oops:
COFFEE!!! Must have coffee... :shock:
Post Reply