I created the small circle (below) in PE and wasn't able to delete it either in 'standard' or contour mode.
Unable to Delete Shape in Part Editor
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- eCabinets Beta Tester
- Posts: 491
- Joined: Wed, Apr 15 2009, 8:22PM
- Company Name: Plymouth Custom Closets
- Country: UNITED STATES
- Location: Plympton, MA
Unable to Delete Shape in Part Editor
http://www.plymouthcustomclosets.com
Dell Precision 490/ Intel Xeon 3.20 Ghz/3 GB RAM/ Nvidia Quadro FX 3450/ Windows XP, sp 3
Dell Precision 490/ Intel Xeon 3.20 Ghz/3 GB RAM/ Nvidia Quadro FX 3450/ Windows XP, sp 3
-
- Junior Member
- Posts: 43
- Joined: Thu, Mar 27 2008, 6:00PM
- Company Name: darrells Carpenter Shop
- Location: Marana, AZ
Re: Unable to Delete Shape in Part Editor
You can right click with this cabinet in the cabinet editor and select Remove Part Editor Cuts either from selected part or the entire cabinet.
-
- eCabinets Beta Tester
- Posts: 491
- Joined: Wed, Apr 15 2009, 8:22PM
- Company Name: Plymouth Custom Closets
- Country: UNITED STATES
- Location: Plympton, MA
Re: Unable to Delete Shape in Part Editor
Thanks, Jon, I eventually did come across that button. If it's not there already, it might make sense for that option to be available in PE as well.
http://www.plymouthcustomclosets.com
Dell Precision 490/ Intel Xeon 3.20 Ghz/3 GB RAM/ Nvidia Quadro FX 3450/ Windows XP, sp 3
Dell Precision 490/ Intel Xeon 3.20 Ghz/3 GB RAM/ Nvidia Quadro FX 3450/ Windows XP, sp 3
-
- Guru Member
- Posts: 645
- Joined: Mon, Nov 20 2006, 3:39PM
- Company Name: Rylex Custom Cabinetry-Close
- Country: UNITED STATES
- Location: Pine Island, New York
- Contact:
Re: Unable to Delete Shape in Part Editor
Nat, it is available in the PE. You can remove individual geometry cuts by clicking on the pencil and choosing option "Geometry Cut" then hover over the cut you wish to remove and it will be highlighted. Left click it and only that cut will be removed.Nat Wheatley wrote:Thanks, Jon, I eventually did come across that button. If it's not there already, it might make sense for that option to be available in PE as well.
-John
-
- eCabinets Beta Tester
- Posts: 491
- Joined: Wed, Apr 15 2009, 8:22PM
- Company Name: Plymouth Custom Closets
- Country: UNITED STATES
- Location: Plympton, MA
Re: Unable to Delete Shape in Part Editor
John, I just tried that and it works great. Not clear on why I didn't try to use it before. Thanks.
http://www.plymouthcustomclosets.com
Dell Precision 490/ Intel Xeon 3.20 Ghz/3 GB RAM/ Nvidia Quadro FX 3450/ Windows XP, sp 3
Dell Precision 490/ Intel Xeon 3.20 Ghz/3 GB RAM/ Nvidia Quadro FX 3450/ Windows XP, sp 3
-
- Guru Member
- Posts: 645
- Joined: Mon, Nov 20 2006, 3:39PM
- Company Name: Rylex Custom Cabinetry-Close
- Country: UNITED STATES
- Location: Pine Island, New York
- Contact:
Re: Unable to Delete Shape in Part Editor
I find myself wondering the same thing!!Nat Wheatley wrote:Not clear on why I didn't try to use it before.
-
- Wizard Member
- Posts: 5852
- Joined: Thu, Jul 28 2005, 10:18AM
- Company Name: Dan Epps
- Country: UNITED STATES
- Location: Rocky Face GA
Re: Unable to Delete Shape in Part Editor
COFFEE!!! Must have coffee...JohnLashuay wrote:I find myself wondering the same thing!!Nat Wheatley wrote:Not clear on why I didn't try to use it before.