Melamine project glue?
Moderator: Jason Susnjara
-
- Guru Member
- Posts: 460
- Joined: Thu, May 19 2005, 3:15PM
- Location: Palm Springs, Ca
- Contact:
Melamine project glue?
I have a project that requires the cab insides to be melamine surfaced. What glues are you guys using that will bind this material for cab assembly? What are the drying/assembly times like?
thanks,
thanks,
-
- eCabinets Beta Tester
- Posts: 979
- Joined: Thu, May 19 2005, 10:50PM
- Location: Los Alamos, CA
Re: Melamine project glue?
Hey Peter,
I use RooClear (RooGlue) from Roo Products. www.rooglue.com Setting time: 4 hrs, Assebly time: 20 minutes. Maybe less in P.S.. I get it from Luios and Co. or MacPac.
Brian
I use RooClear (RooGlue) from Roo Products. www.rooglue.com Setting time: 4 hrs, Assebly time: 20 minutes. Maybe less in P.S.. I get it from Luios and Co. or MacPac.
Brian
-
- Wizard Member
- Posts: 1896
- Joined: Wed, May 18 2005, 7:54PM
- Company Name: Milltech Millworks Ltd.
- Country: CANADA
- Location: Edmonton, Alberta
- Contact:
Re: Melamine project glue?
Hi Peter, what type of joinery do you plan on using?
-
- Guru Member
- Posts: 460
- Joined: Thu, May 19 2005, 3:15PM
- Location: Palm Springs, Ca
- Contact:
Re: Melamine project glue?
Rick,
Ordinarily, I use butt joinery on the sides, bottom and top, glued and nailed gunned. The back is dadoed, glued and nailed.
I exclusively use face frames, and they are also glued and either nailed or with biscuits (depending on my mood at the time).
thanks,
Ordinarily, I use butt joinery on the sides, bottom and top, glued and nailed gunned. The back is dadoed, glued and nailed.
I exclusively use face frames, and they are also glued and either nailed or with biscuits (depending on my mood at the time).
thanks,
-
- Guru Member
- Posts: 828
- Joined: Fri, Jun 17 2005, 12:23AM
- Location: South Africa
Re: Melamine project glue?
Peter I am trying to understand your query. When you say melamine do you mean melamine foil or are you talking about something like Formica?, What is it you are trying to laminate onto. i.e. what are the cases made of? Can you not laminate the sheet material before cutting and assembling?
-
- Guru Member
- Posts: 460
- Joined: Thu, May 19 2005, 3:15PM
- Location: Palm Springs, Ca
- Contact:
Re: Melamine project glue?
Nick,
I am considering using a pre-finished sheet stock for the interiors of the cabinets. One sheet stock is Melamine foil coated (both sides) and the other is using a Formica type product (both sides). Right now, I am leaning toward the Formica product because of its durability. ALL the coatings will be applied prior to my receipt of the sheet goods. I am not interested in getting into the surface coating biz (or activities) and learning the techniques.
My cabs are typically assembled using glued butt joinery with nailing, and a rabbited back glued and nailed, with a face frame glued with biscuits or nails.
Peter
I am considering using a pre-finished sheet stock for the interiors of the cabinets. One sheet stock is Melamine foil coated (both sides) and the other is using a Formica type product (both sides). Right now, I am leaning toward the Formica product because of its durability. ALL the coatings will be applied prior to my receipt of the sheet goods. I am not interested in getting into the surface coating biz (or activities) and learning the techniques.
My cabs are typically assembled using glued butt joinery with nailing, and a rabbited back glued and nailed, with a face frame glued with biscuits or nails.
Peter
-
- Guru Member
- Posts: 477
- Joined: Tue, May 17 2005, 1:55PM
Re: Melamine project glue?
Peter -- If you are going with a prefinished material I would biscuit or screw or dowel the cases together. I glue and nail but I also rabbet top and bottom and back of the side gables. If you are just using butt joints I think they require more.Peter Walsh wrote:Nick,
I am considering using a pre-finished sheet stock for the interiors of the cabinets. One sheet stock is Melamine foil coated (both sides) and the other is using a Formica type product (both sides). Right now, I am leaning toward the Formica product because of its durability. ALL the coatings will be applied prior to my receipt of the sheet goods. I am not interested in getting into the surface coating biz (or activities) and learning the techniques.
My cabs are typically assembled using glued butt joinery with nailing, and a rabbited back glued and nailed, with a face frame glued with biscuits or nails.
Peter
-
- Guru Member
- Posts: 460
- Joined: Thu, May 19 2005, 3:15PM
- Location: Palm Springs, Ca
- Contact:
Re: Melamine project glue?
Wally,
Thanks for the assembly tips. This will be my first project with this stuff. I usually only work with hard woods and veneered ply for the libraries I build. Biscuits or dowels, good suggestions......can do both.
regards,
Thanks for the assembly tips. This will be my first project with this stuff. I usually only work with hard woods and veneered ply for the libraries I build. Biscuits or dowels, good suggestions......can do both.
regards,
-
- Guru Member
- Posts: 622
- Joined: Fri, May 20 2005, 6:48PM
- Company Name: Classic Cabinetry
- Location: Albany Western Australia
- Contact:
Re: Melamine project glue?
Hi Peter,
The melamine construction is the only way we do things in Australia and many other European countries.
There is a melamine glue that is designed to glue non porus materials together. Its like a PVA but has a rubbery feel about it.
You might think this is slack but we only pin and screw our cabinets together as we use applied ends everywhere. I do use what I call the blind Dado if I have both sides seen IE no applied panels.
I have lately been pulling out older cabinets that have been made this way and they have lasted the test of time.
I guess its up to you what you feel comfortable giving the public with your name on it.
Regards
Neville
The melamine construction is the only way we do things in Australia and many other European countries.
There is a melamine glue that is designed to glue non porus materials together. Its like a PVA but has a rubbery feel about it.
You might think this is slack but we only pin and screw our cabinets together as we use applied ends everywhere. I do use what I call the blind Dado if I have both sides seen IE no applied panels.
I have lately been pulling out older cabinets that have been made this way and they have lasted the test of time.
I guess its up to you what you feel comfortable giving the public with your name on it.
Regards
Neville
Neville Australia
-
- Guru Member
- Posts: 460
- Joined: Thu, May 19 2005, 3:15PM
- Location: Palm Springs, Ca
- Contact:
Re: Melamine project glue?
Neville,
Thanks for the word from down under.
It's clear I have to use more robust fastening than with plain wood. What is the name of the glue you use?
regards,
Thanks for the word from down under.
It's clear I have to use more robust fastening than with plain wood. What is the name of the glue you use?
regards,
-
- Guru Member
- Posts: 622
- Joined: Fri, May 20 2005, 6:48PM
- Company Name: Classic Cabinetry
- Location: Albany Western Australia
- Contact:
Re: Melamine project glue?
Hi Peter,
The glue is made by Bostik called AV 56. Is water based and has a assembly time of 20mines at 25C and Clamp time of 4hrs
I have cut this from their web site.
1024
AV 56, Melamine Laminating Board Adhesive 5lt
AV56 is an emulsion based adhesive for the bonding of synthetic laminated board to timber, particle board, Craftwood and other semi-porous surfaces. It is an excellent adhesive for a variety of laminates including DAP, Melamine and vinyl coated board. AV56 Clear is an unfilled version for applications requiring a clear glue line. Application and usage detail are the same as for AV56 Off White.
If Bostik is not sold in the US give me a few names of glue manufacturers as I'm sure to have their versions available.
Regards
Neville
The glue is made by Bostik called AV 56. Is water based and has a assembly time of 20mines at 25C and Clamp time of 4hrs
I have cut this from their web site.
1024
AV 56, Melamine Laminating Board Adhesive 5lt
AV56 is an emulsion based adhesive for the bonding of synthetic laminated board to timber, particle board, Craftwood and other semi-porous surfaces. It is an excellent adhesive for a variety of laminates including DAP, Melamine and vinyl coated board. AV56 Clear is an unfilled version for applications requiring a clear glue line. Application and usage detail are the same as for AV56 Off White.
If Bostik is not sold in the US give me a few names of glue manufacturers as I'm sure to have their versions available.
Regards
Neville
Neville Australia
-
- Guru Member
- Posts: 477
- Joined: Tue, May 17 2005, 1:55PM
Re: Melamine project glue?
Peter -- I forgot to mention the glue that I use. It is TiteBond Melamine glue and is very good. I have also used Roo glue and it was quite good too.Peter Walsh wrote:Neville,
Thanks for the word from down under.
It's clear I have to use more robust fastening than with plain wood. What is the name of the glue you use?
regards,
http://www.richelieu.com/produit/detail ... o=15004016
-
- Guru Member
- Posts: 460
- Joined: Thu, May 19 2005, 3:15PM
- Location: Palm Springs, Ca
- Contact:
Re: Melamine project glue?
Wally,
Thanks. I'll check up on TiteBond. Their full line is sold here. I didn't know they made this product.
Thanks again.
regards,
Thanks. I'll check up on TiteBond. Their full line is sold here. I didn't know they made this product.
Thanks again.
regards,
-
- Senior Member
- Posts: 249
- Joined: Wed, Dec 10 2008, 3:29PM
- Company Name: Eastcoast Ultimate
- Country: AUSTRALIA
- Contact:
Re: Melamine project glue?
Been in the industry for over 20 years in Australia, and travelled to countless joineries working for Microvellum as a tech. and I have never seen RooGlue used anywhere by anyone in Australia. Pretty funny seeing as it allegedly originatyed here:)
Core i7-2600 @ 3.70Ghz - 8 GB ram - Win 7 Ultimate 64bit - 2 x 24" ASUS monitors - Nvidia 600 Quadro 1GB graphics
www.eastcoastultimate.com.au
www.eastcoastultimate.com.au
-
- Guru Member
- Posts: 460
- Joined: Thu, May 19 2005, 3:15PM
- Location: Palm Springs, Ca
- Contact:
Re: Melamine project glue?
Jason,
I think you may have touched on a "sticky" subject.
regards,
I think you may have touched on a "sticky" subject.
regards,