Cad drawings of machine

Discuss Thermwood 3-axis Machinery, Controller, and Software.

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Jim Bullis

Post Reply
Zach Froble
Senior Member
Posts: 171
Joined: Tue, Jun 21 2005, 3:23PM
Location: Connellsville, PA

Cad drawings of machine

Post by Zach Froble »

Thermwood,

Do you have any dxf drawings for a C40 4x8 machine. We are reorganizing and laying out our shop for better efficiency. I saw the dimensional drawings on the site, I was looking for a scaled drawing that I can drag around to find the best fit.

Zach
Lyndan Designs
Machining and CAD Services
Ryan Hochgesang

Re: Cad drawings of machine

Post by Ryan Hochgesang »

Hi Zach,

If you contact us directly with your machine base number, we can get you the dxf drawing of your machine foot print.

email: program@thermwood.com

Thanks!
Zach Froble
Senior Member
Posts: 171
Joined: Tue, Jun 21 2005, 3:23PM
Location: Connellsville, PA

Re: Cad drawings of machine

Post by Zach Froble »

Ryan,

Thanks for the drawings they made it easier to adjust the position of the machine with the conveyors so I could get an exact layout.

Zach
Lyndan Designs
Machining and CAD Services
Ernest Myers
New Member
Posts: 2
Joined: Mon, Jun 22 2009, 7:50AM
Company Name: E Designs
Country: UNITED STATES
Location: New Orleans, LA
Contact:

Re: Cad drawings of machine

Post by Ernest Myers »

I just purchase a C40 from a cabinet shop. I am also trying to layout my shop in CAD. Is it also possible for me to obtain a copy of the DXF file for the C40 with a 4x8 table?

I am duplicating this request also via email to program@termwood.com

Thanks,

Ernest Myers
E Designs
New Orleans, LA
Post Reply