how to create in ecabinets
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- Junior Member
- Posts: 97
- Joined: Fri, Mar 20 2009, 8:01AM
- Company Name: ADP STORE FIXTURES
- Country: AUSTRALIA
- Location: PERTH-AUSTRALIA
how to create in ecabinets
we are trying to make few bases which are round. how to construct round base of 500 diameter is there any option to do in cabinets i tried to do it by taking a square and fillet it in cabinet editor but failed it doesnt allow 4th side filet got stuck,anyone had tryed to create round base pls suggest
-
- Guru Member
- Posts: 828
- Joined: Fri, Jun 17 2005, 12:23AM
- Location: South Africa
Re: how to create in ecabinets
It should be very easy to do in the part editor, use the "contour" icon and create an arc or circle there by selcting the circle/arc icon. Afterwards you can create a part using a closed contour.
Re: how to create in ecabinets
For future reference, this posting would be best located under the eCabinet section of the forum. This would allow more communication with those who are specifically using eCabinets.
Link:
http://www.thermwood.com/forums/viewforum.php?f=3
Thank you!
Link:
http://www.thermwood.com/forums/viewforum.php?f=3
Thank you!
-
- Junior Member
- Posts: 97
- Joined: Fri, Mar 20 2009, 8:01AM
- Company Name: ADP STORE FIXTURES
- Country: AUSTRALIA
- Location: PERTH-AUSTRALIA
Re: how to create in ecabinets
Nick M Singer wrote:It should be very easy to do in the part editor, use the "contour" icon and create an arc or circle there by selcting the circle/arc icon. Afterwards you can create a part using a closed contour.
hi nick
thanks for giving the hint that helped me.
-
- Junior Member
- Posts: 97
- Joined: Fri, Mar 20 2009, 8:01AM
- Company Name: ADP STORE FIXTURES
- Country: AUSTRALIA
- Location: PERTH-AUSTRALIA
Re: how to create in ecabinets
Ryan Hochgesang wrote:For future reference, this posting would be best located under the eCabinet section of the forum. This would allow more communication with those who are specifically using eCabinets.
Link:
http://www.thermwood.com/forums/viewforum.php?f=3
Thank you!
i agree with u ryan i request the admin to take a chance and move the post to relevant section
Thank you