Not sure if this is in the right place but a little while back the boys at thermwood changed how we print from the machine. When the change was made we lost the ability to print out just bar codes. Is there anyway we can get that back. We often print just bar code for the offalls because we do not need all the labels for the cabinets or components.
thanks
Steve
Printing Labels
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- Junior Member
- Posts: 80
- Joined: Wed, Jul 20 2005, 7:29AM
- Company Name: Silhouette Custom Cabinets
- Country: CANADA
- Location: Hamilton, Ontario
-
- Senior Member
- Posts: 167
- Joined: Tue, Oct 03 2006, 6:51PM
- Location: Phoenix, AZ
- Contact:
Re: Printing Labels
Steve,
I'm with you on this... We've been throwing away a lot of labels just to get that off-fall label.
Fred
I'm with you on this... We've been throwing away a lot of labels just to get that off-fall label.
Fred
Fred Hirsch
-
- eCabinets Beta Tester
- Posts: 1119
- Joined: Tue, May 10 2005, 9:36PM
- Company Name: Corlane Custom Cabinetry LLC
- Country: UNITED STATES
- Location: Carnesville, GA
- Contact:
Re: Printing Labels
You can still print only the barcoded labels, but it's a bit confusing now. When you're at the print dialog, you have a button that says "Select file" or something similar. Click it, and you'll get a file list of the different labels. Look for one that has the word "barcode" in it, along with the number of the label you're using.
Hopefully this gets you going... I'm not at the machine right now so I'm doing it from memory. (And my memory SUCKS. LOL)
Hopefully this gets you going... I'm not at the machine right now so I'm doing it from memory. (And my memory SUCKS. LOL)
http://www.corlanecabinetry.com
Intel Core i7-5820 3.3GHz, 16GB RAM, NVidia Quadro K2200 4GB, Windows 8.1 Pro 64 bit
CS-41 4x8
CS-45 5x12
Intel Core i7-5820 3.3GHz, 16GB RAM, NVidia Quadro K2200 4GB, Windows 8.1 Pro 64 bit
CS-41 4x8
CS-45 5x12
-
- Senior Member
- Posts: 167
- Joined: Tue, Oct 03 2006, 6:51PM
- Location: Phoenix, AZ
- Contact:
Re: Printing Labels
Jeremy,
Thanks for the heads up.... I was a bit surprised that it could have been removed.
Thanks,
Fred
Thanks for the heads up.... I was a bit surprised that it could have been removed.
Thanks,
Fred
Fred Hirsch
-
- Guru Member
- Posts: 559
- Joined: Wed, May 18 2005, 6:59PM
- Company Name: CNC Automation
- Country: CANADA
- Location: St. Zotique, Québec, Canada
- Contact:
Re: Printing Labels - Off-Falls Only
Here is a label formatted to print ONLY OFF-FALLS...
>> No warranties are expressed on implied. The label has been tested but it's use is your own responsibility.
Cheers!
>> No warranties are expressed on implied. The label has been tested but it's use is your own responsibility.
- Download and save the attached ZIP file to your Desktop.
- Unzip the contents and copy the "30252_Address_Barcode_Off_Falls.RPT" file into the "C:\Rolling Nest\Labels\" directory on the Thermwood controller.
- Make sure to select this new label format to print labels with barcodes for OFF-FALLS ONLY.
Cheers!
- Attachments
-
- 30252_Address_Barcode_Off_Falls.zip
- Standard 30252 Address Label with Barcodes for OFF-CUTS ONLY.
- (4.83 KiB) Downloaded 388 times
-
- Guru Member
- Posts: 559
- Joined: Wed, May 18 2005, 6:59PM
- Company Name: CNC Automation
- Country: CANADA
- Location: St. Zotique, Québec, Canada
- Contact:
Re: Printing Labels - Off-Falls Only Updated
I have updated the above "custom" label I had posted previously to indicate the SHEET and "Part #" associated with the Off-Fall.
>> No warranties are expressed or implied. The label has been tested but it's use is your own responsibility.
>> No warranties are expressed or implied. The label has been tested but it's use is your own responsibility.
- Download and save the attached ZIP file to your Desktop.
- Unzip the contents and copy the "30252_Address_Barcode_Off_Falls.RPT" file into the "C:\Rolling Nest\Labels\" directory on the Thermwood controller.
(If you had tried out the earlier one, make sure that you over-write it with this newer version.) - Make sure to select this new label format to print labels with barcodes for OFF-FALLS ONLY.
- Attachments
-
- 30252_Address_Barcode_Off_Falls-2.zip
- Rev 2- Standard 30252 Address Label with Barcodes for OFF-CUTS ONLY
- (4.97 KiB) Downloaded 392 times