Ok Guys,
I think I have found a work around for blind corner cabinets in e-cab. The only problem is that the software flips the tenon on the blind side thus creating a flip operation on the machine. eg. tenon on the top side on one end of the shelf and on the bottom side on the same shelf. I have attached the cabinet. Is there anyway to avoid this.
thanks in advance
Steve
Blind Corner cabinet
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- Junior Member
- Posts: 80
- Joined: Wed, Jul 20 2005, 7:29AM
- Company Name: Silhouette Custom Cabinets
- Country: CANADA
- Location: Hamilton, Ontario
Blind Corner cabinet
- Attachments
-
- BC 30W 21-5H LSF.hsf
- (356.02 KiB) Downloaded 301 times
-
- Wizard Member
- Posts: 5852
- Joined: Thu, Jul 28 2005, 10:18AM
- Company Name: Dan Epps
- Country: UNITED STATES
- Location: Rocky Face GA
Re: Blind Corner cabinet
Why use a corner cabinet as the starting point for this cabinet Steve? Use a Std Upper and change the settings to match your needs. Add an up-down stretcher for the return and you're set...like this:
- Attachments
-
- Blind Corner Upper Frameless.hsf
- (344.02 KiB) Downloaded 292 times