Thermwood at the AWFS Show in Las Vegas
Moderator: Jason Susnjara
-
- Thermwood Team
- Posts: 248
- Joined: Tue, May 10 2005, 12:54PM
- Location: Thermwood
Thermwood at the AWFS Show in Las Vegas
Here are links to a couple of pics of our booth at the AWFS show in Las Vegas - we are Booth #5200. Good crowd size so far:
http://twitpic.com/ag93a
http://twitpic.com/ag8ts
http://twitpic.com/ag93a
http://twitpic.com/ag8ts
Thanks,
Duane Marrett
Thermwood/eCabinet Systems
Duane Marrett
Thermwood/eCabinet Systems
-
- Thermwood Team
- Posts: 248
- Joined: Tue, May 10 2005, 12:54PM
- Location: Thermwood
Re: Thermwood at the AWFS Show in Las Vegas
More pics from the AWFS Show:
Thermwood Booth #5200 at AWFS Vegas Show. Demonstrating our CNC Routers, I-Cut, Links from eCabinets to ShopBot & from 20-20 to a Thermwood
http://twitpic.com/agiwy
Nice sample of graphic produced with i-cut software on a Thermwood Model 45 CNC Router at AWFS Show in Las Vegas
http://twitpic.com/agjfj
Thermwood's "Wall of Applications" possible with a Thermwood CNC Router. On display at AWFS Show in Las Vegas Booth #5200
http://twitpic.com/agjsj
Thermwood Booth #5200 at AWFS Vegas Show. Demonstrating our CNC Routers, I-Cut, Links from eCabinets to ShopBot & from 20-20 to a Thermwood
http://twitpic.com/agiwy
Nice sample of graphic produced with i-cut software on a Thermwood Model 45 CNC Router at AWFS Show in Las Vegas
http://twitpic.com/agjfj
Thermwood's "Wall of Applications" possible with a Thermwood CNC Router. On display at AWFS Show in Las Vegas Booth #5200
http://twitpic.com/agjsj
Thanks,
Duane Marrett
Thermwood/eCabinet Systems
Duane Marrett
Thermwood/eCabinet Systems
-
- Thermwood Team
- Posts: 248
- Joined: Tue, May 10 2005, 12:54PM
- Location: Thermwood
Re: Thermwood at the AWFS Show in Las Vegas
Thanks,
Duane Marrett
Thermwood/eCabinet Systems
Duane Marrett
Thermwood/eCabinet Systems
-
- eCabinets Beta Tester
- Posts: 1119
- Joined: Tue, May 10 2005, 9:36PM
- Company Name: Corlane Custom Cabinetry LLC
- Country: UNITED STATES
- Location: Carnesville, GA
- Contact:
Re: Thermwood at the AWFS Show in Las Vegas
Thanks for the pics. I wish I was there. I hope ya'll sell lots of machines!
http://www.corlanecabinetry.com
Intel Core i7-5820 3.3GHz, 16GB RAM, NVidia Quadro K2200 4GB, Windows 8.1 Pro 64 bit
CS-41 4x8
CS-45 5x12
Intel Core i7-5820 3.3GHz, 16GB RAM, NVidia Quadro K2200 4GB, Windows 8.1 Pro 64 bit
CS-41 4x8
CS-45 5x12
-
- Wizard Member
- Posts: 1896
- Joined: Wed, May 18 2005, 7:54PM
- Company Name: Milltech Millworks Ltd.
- Country: CANADA
- Location: Edmonton, Alberta
- Contact:
Re: Thermwood at the AWFS Show in Las Vegas
Ya thanks for the pics Duane. Is that a copy of V6 in the background?
-
- Guru Member
- Posts: 622
- Joined: Fri, May 20 2005, 6:48PM
- Company Name: Classic Cabinetry
- Location: Albany Western Australia
- Contact:
Re: Thermwood at the AWFS Show in Las Vegas
Duane,
How about a little more detail on what is newly released or improved at AWFS at the Thermwood stand. Naturally Ecabinet related improvements would be very interesting. Are you showing the beta of Ecabinets there?
What about the machinery any new things or processes shown?
Thanks for the updates so we feel more the part of the show.
Regards
Neville
How about a little more detail on what is newly released or improved at AWFS at the Thermwood stand. Naturally Ecabinet related improvements would be very interesting. Are you showing the beta of Ecabinets there?
What about the machinery any new things or processes shown?
Thanks for the updates so we feel more the part of the show.
Regards
Neville
Neville Australia
-
- Thermwood Team
- Posts: 248
- Joined: Tue, May 10 2005, 12:54PM
- Location: Thermwood
Re: Thermwood at the AWFS Show in Las Vegas
We are showing eCabinets Version 5.2 Build 5 at AWFS (Version 6.0 Build 1 is in Beta Testing currently, so hopefully not too much longer).
Other things on display at the show are a CabinetShop 45 5×10 with the i-cut camera mounted on it that is cutting signs and nested-based cabinets. Some of the material(s) we are using are plywood/melamine/acryllic/di-bond/pvc/alucobond.
We also have three Fravol Edgebanders at the show - a S2 Echo Automatic Edge Bander, a VSB Semi-Automatic Edge Bander and a VSR Semi-Automatic Trimmer.
We are working in partnership with ShopBot and the link from eCabs to a ShopBot (this is on display in their booth), and also have representatives from 20-20 Technologies demonstrating the link from 20-20 to a Thermwood at both our booth and theirs.
Thanks for the questions - we will have more images and updates as the show progresses.
Other things on display at the show are a CabinetShop 45 5×10 with the i-cut camera mounted on it that is cutting signs and nested-based cabinets. Some of the material(s) we are using are plywood/melamine/acryllic/di-bond/pvc/alucobond.
We also have three Fravol Edgebanders at the show - a S2 Echo Automatic Edge Bander, a VSB Semi-Automatic Edge Bander and a VSR Semi-Automatic Trimmer.
We are working in partnership with ShopBot and the link from eCabs to a ShopBot (this is on display in their booth), and also have representatives from 20-20 Technologies demonstrating the link from 20-20 to a Thermwood at both our booth and theirs.
Thanks for the questions - we will have more images and updates as the show progresses.
Thanks,
Duane Marrett
Thermwood/eCabinet Systems
Duane Marrett
Thermwood/eCabinet Systems
-
- Senior Member
- Posts: 167
- Joined: Tue, Oct 03 2006, 6:51PM
- Location: Phoenix, AZ
- Contact:
Re: Thermwood at the AWFS Show in Las Vegas
Duane-
Could you expand a bit on what the i-cut software is? Was at the booth, saw the samples, but did think twice about what it was....
Thanks,
Fred
Could you expand a bit on what the i-cut software is? Was at the booth, saw the samples, but did think twice about what it was....
Thanks,
Fred
Fred Hirsch
-
- Thermwood Team
- Posts: 1721
- Joined: Tue, May 10 2005, 1:26PM
- Location: Thermwood
- Contact:
Re: Thermwood at the AWFS Show in Las Vegas
Hi Fred,
I-Cut is a camera and software combo with the camera mounted next to the spindle and the software installed on the controller. When printing signs, for instance a screen press, the force that is put on the material when printing can cause distortion or skewing. The same goes for the other printing methods. The design file not only contains the design(s) but also black dots around each design. The camera will automatically scan each dot on the printed material and then the machine will cutout the design. I have attached a simple picture showing how the image can be distorted and with the dots, camera and the algorithims within the software can create perfect signs.
I-Cut is a camera and software combo with the camera mounted next to the spindle and the software installed on the controller. When printing signs, for instance a screen press, the force that is put on the material when printing can cause distortion or skewing. The same goes for the other printing methods. The design file not only contains the design(s) but also black dots around each design. The camera will automatically scan each dot on the printed material and then the machine will cutout the design. I have attached a simple picture showing how the image can be distorted and with the dots, camera and the algorithims within the software can create perfect signs.
- Attachments
-
- I-Cut.JPG (24.08 KiB) Viewed 14946 times
Jason Susnjara
V.P., Marketing
Thermwood Corp.
On YouTube:
http://www.youtube.com/ThermwoodCNC
Thermwood Blog:
http://blog.thermwood.com
V.P., Marketing
Thermwood Corp.
On YouTube:
http://www.youtube.com/ThermwoodCNC
Thermwood Blog:
http://blog.thermwood.com
-
- Senior Member
- Posts: 167
- Joined: Tue, Oct 03 2006, 6:51PM
- Location: Phoenix, AZ
- Contact:
Re: Thermwood at the AWFS Show in Las Vegas
Jason,
Is there anywhere I could get more information on this. I do some sign work for a couple different shops in town and I am curious how this might work with something like that new Andi co-jet or just laminated art onto a sheet of material.
Thanks,
Fred
Is there anywhere I could get more information on this. I do some sign work for a couple different shops in town and I am curious how this might work with something like that new Andi co-jet or just laminated art onto a sheet of material.
Thanks,
Fred
Fred Hirsch
-
- Thermwood Team
- Posts: 1721
- Joined: Tue, May 10 2005, 1:26PM
- Location: Thermwood
- Contact:
Re: Thermwood at the AWFS Show in Las Vegas
Hi Fred,
We are currently working on literature for this but will email you a couple of files that you can take a look at.
Is the Andi Co-Jet a UV printer?
thanks,
We are currently working on literature for this but will email you a couple of files that you can take a look at.
Is the Andi Co-Jet a UV printer?
thanks,
Jason Susnjara
V.P., Marketing
Thermwood Corp.
On YouTube:
http://www.youtube.com/ThermwoodCNC
Thermwood Blog:
http://blog.thermwood.com
V.P., Marketing
Thermwood Corp.
On YouTube:
http://www.youtube.com/ThermwoodCNC
Thermwood Blog:
http://blog.thermwood.com
-
- Senior Member
- Posts: 167
- Joined: Tue, Oct 03 2006, 6:51PM
- Location: Phoenix, AZ
- Contact:
Re: Thermwood at the AWFS Show in Las Vegas
Jason,
Thank you for the files... Yes, my understanding is the co-jet is UV.
Thanks,
Fred
Thank you for the files... Yes, my understanding is the co-jet is UV.
Thanks,
Fred
Fred Hirsch
-
- Thermwood Sales
- Posts: 101
- Joined: Mon, Nov 06 2006, 4:03PM
Re: Thermwood at the AWFS Show in Las Vegas
Hi Fred,
Was good talking with you and your wife at the show. When convenient just give me a call and we can discuss the i-cut process. I'm working with a customer now who is very interested in this process. Actually have a web-ex demo scheduled with them next week. As a result I've become pretty familiar with the process and can enlighten you a little more in detail if need. Thanks Fred. If I don't hear from you I'll try you soon.
Dave
Was good talking with you and your wife at the show. When convenient just give me a call and we can discuss the i-cut process. I'm working with a customer now who is very interested in this process. Actually have a web-ex demo scheduled with them next week. As a result I've become pretty familiar with the process and can enlighten you a little more in detail if need. Thanks Fred. If I don't hear from you I'll try you soon.
Dave
-
- eCabinets Beta Tester
- Posts: 979
- Joined: Thu, May 19 2005, 10:50PM
- Location: Los Alamos, CA
Re: Thermwood at the AWFS Show in Las Vegas
Hey t' Dave!
Brian
Brian