How do I get slab drawer fronts with vertical grain to nest with the door that will be below it so the grain matches up?
I thought I saw that high lighting the door and opening before adding the drawer front did it.
But I have a door/drawer that it does not work with.
Slab Doors and drawers
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- Senior Member
- Posts: 113
- Joined: Fri, Jul 08 2005, 2:25PM
- Company Name: The WoodCrafting Company
- Location: Hesperia, California
Slab Doors and drawers
The WoodCrafter
-
- Guru Member
- Posts: 256
- Joined: Sat, Apr 04 2009, 6:27PM
- Company Name: ShopBot Tools Inc
- Country: UNITED STATES
- Location: Durham NC
Re: Slab Doors and drawers
Roger...
When in the Cabinet/Assembly Editor... select the door and draw fronts, right click, select "Group parts". That should do the trick
When in the Cabinet/Assembly Editor... select the door and draw fronts, right click, select "Group parts". That should do the trick
Gary Campbell
ShopBot Tools Production Support
ShopBot (eCabinets) Link Training & Support
ShopBot Tools Production Support
ShopBot (eCabinets) Link Training & Support
-
- Senior Member
- Posts: 113
- Joined: Fri, Jul 08 2005, 2:25PM
- Company Name: The WoodCrafting Company
- Location: Hesperia, California