placing 2 drawer fronts in wide cabinet w/ partition
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- New Member
- Posts: 9
- Joined: Thu, Sep 01 2005, 7:01PM
placing 2 drawer fronts in wide cabinet w/ partition
I have a wide face framed cabinet with a centered partition and a stretcher. Placing 2 inset drawer fronts, I am able to place one but not a second, how do you place it?
I could place a double door but this would create problems with hardware holes.
thank you in advance.
I could place a double door but this would create problems with hardware holes.
thank you in advance.
-
- Guru Member
- Posts: 645
- Joined: Mon, Nov 20 2006, 3:39PM
- Company Name: Rylex Custom Cabinetry-Close
- Country: UNITED STATES
- Location: Pine Island, New York
- Contact:
Re: placing 2 drawer fronts in wide cabinet w/ partition
John,
Post the cabinet and we'll take a look at it.
Post the cabinet and we'll take a look at it.
-
- eCabinets Beta Tester
- Posts: 1585
- Joined: Tue, May 17 2005, 1:16PM
- Location: Norwood Pa.
Re: placing 2 drawer fronts in wide cabinet w/ partition
I set the right one but I can not set the left. My computer freezes up.I know it's going to snow Sat. here but why the computer is freezes up today
- Attachments
-
- Freeze Up drawer-2_11.jpg (74.36 KiB) Viewed 8526 times
-
- Senior Member
- Posts: 242
- Joined: Wed, Oct 24 2007, 9:58PM
- Company Name: American Millwork Company
- Country: UNITED STATES
- Location: Joplin, Missouri
Re: placing 2 drawer fronts in wide cabinet w/ partition
John,
Is this what you are trying to do? If so, I just placed the drawers in drawer box editor.
John D.
Is this what you are trying to do? If so, I just placed the drawers in drawer box editor.
John D.
-
- Senior Member
- Posts: 242
- Joined: Wed, Oct 24 2007, 9:58PM
- Company Name: American Millwork Company
- Country: UNITED STATES
- Location: Joplin, Missouri
Re: placing 2 drawer fronts in wide cabinet w/ partition
John,
Here is another one I did with placing two display boards as drawer fronts.
You can take it to part editor to put an edge on it if you want.
John
Here is another one I did with placing two display boards as drawer fronts.
You can take it to part editor to put an edge on it if you want.
John
-
- New Member
- Posts: 9
- Joined: Thu, Sep 01 2005, 7:01PM
Re: placing 2 drawer fronts in wide cabinet w/ partition
Here is the cabinet, it does not make sense that I would need to use a display board, If I could create a double door, a double drawer front would be a nice option also.
Thanks
Thanks
- Attachments
-
- test.hsf
- (498.02 KiB) Downloaded 320 times
-
- eCabinets Beta Tester
- Posts: 1585
- Joined: Tue, May 17 2005, 1:16PM
- Location: Norwood Pa.
Re: placing 2 drawer fronts in wide cabinet w/ partition
The opening is on top right under the top it is about a 1/8"
- Attachments
-
- Test-2_12-19-09.hsf
- (542.02 KiB) Downloaded 323 times
-
- Shot1.jpg (79.97 KiB) Viewed 8475 times
-
- Shot2.jpg (67.86 KiB) Viewed 8475 times
-
- New Member
- Posts: 9
- Joined: Thu, Sep 01 2005, 7:01PM
Re: placing 2 drawer fronts in wide cabinet w/ partition
George, I am not able to highlight the area, there is a partition and when setting the first drawer front the right side reveal is 1/2 the opening minus 1/16.
If I place a double door there and then a drawer box my hardware holes would not be correct.
I most likely am missing something quite simple.
Thanks
JV
If I place a double door there and then a drawer box my hardware holes would not be correct.
I most likely am missing something quite simple.
Thanks
JV
-
- Wizard Member
- Posts: 1896
- Joined: Wed, May 18 2005, 7:54PM
- Company Name: Milltech Millworks Ltd.
- Country: CANADA
- Location: Edmonton, Alberta
- Contact:
Re: placing 2 drawer fronts in wide cabinet w/ partition
John, if you hilite the opening and add a mid stile, you can then add two separate fronts. Adjust your mid stile to 1/32" in width, and adjust your gaps for correct clearance and it should show properly. Note: Make your Mid Stile from a different material like DNC so it doesn't confuse your cut-list. Also watch your Drawer box side clearances. HTH.
- Attachments
-
- test 2.hsf
- (520.02 KiB) Downloaded 323 times
-
- test 2.jpg (18.23 KiB) Viewed 8489 times
-
- New Member
- Posts: 9
- Joined: Thu, Sep 01 2005, 7:01PM
Re: placing 2 drawer fronts in wide cabinet w/ partition
Rick, I considered this and will try it now, sure enough it works, I will need to try the same thing with a euro style cabinet.
Thank you, John Vickerman
Thank you, John Vickerman