I have an AXYS cnc and i was wondering if anyone else has found a way to link ecabinets to it.
thanks!
software combatability with AXYS cnc?
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- New Member
- Posts: 2
- Joined: Wed, Jan 13 2010, 1:05AM
- Company Name: madera cabinetry
-
- Wizard Member
- Posts: 4723
- Joined: Mon, May 09 2005, 7:33PM
- Company Name: Double E Cabinets
- Country: UNITED STATES
- Location: Amarillo, TX
Re: software combatability with AXYS cnc?
Garrett,
I think at this time the eCabinet Systems sorftware will only work with the Thermwood and Shop Bot routers (using the Shop Bot Link). I don't know if Thermwood is planning on expanding to any other machines or not.
Kerry
I think at this time the eCabinet Systems sorftware will only work with the Thermwood and Shop Bot routers (using the Shop Bot Link). I don't know if Thermwood is planning on expanding to any other machines or not.
Kerry
-
- Senior Member
- Posts: 161
- Joined: Thu, May 04 2006, 11:09AM
- Location: Southwest Houston
- Contact:
Re: software combatability with AXYS cnc?
If you buy a shopbot controller to run your machine it should work.
Kenneth
Kenneth
-
- Site Admin
- Posts: 482
- Joined: Mon, May 09 2005, 2:10PM
- Company Name: Thermwood Corporation
- Country: UNITED STATES
- Location: Thermwood
Re: software combatability with AXYS cnc?
Please re-read the Terms and Conditions for this forum.
http://www.thermwood.com/forums/viewtop ... f=3&t=9994
http://www.thermwood.com/forums/viewtop ... f=3&t=9994
Dean Fehribach
I.S. Mgr., Thermwood
Dell Workstation T1650 / XEON E3 / 8GB RAM / 1GB nVidia Quadro 600 / Windows 8 Pro x64
I.S. Mgr., Thermwood
Dell Workstation T1650 / XEON E3 / 8GB RAM / 1GB nVidia Quadro 600 / Windows 8 Pro x64