What does this mean? I modified a cabinet in V6 and it looks correct. When I try to save it I get this error message.
An error occured while adding hoops information to save the file. It wil not save my cabinet.
It let me save it as an assembly, but it is NOT an assembly
I tried to attach it, but all I can find are the v5 files to attach. The new files are there when the program is open, but they are not there when I go to
Program files/thermwood/ecabs/cabinets....ect Where are they?
error in hoops
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- Senior Member
- Posts: 161
- Joined: Thu, May 04 2006, 11:09AM
- Location: Southwest Houston
- Contact:
-
- Senior Member
- Posts: 161
- Joined: Thu, May 04 2006, 11:09AM
- Location: Southwest Houston
- Contact:
Re: error in hoops
ok, I found the files in a different location than I was used to.
Here is the cabinet that gave the trouble. This cabinet saved fine as is. I changed it to a 28 inches wide, 10 inch left stile on the face frame to make it like a blind cabinet, took off the drawers on the bottom and the center rail there, added a shelf and a door on the bottom.
Then I can't save it as a cabinet anymore. Only as an assembly.
It is not the string of where I try to save it, because I use the same string for other cabients in the same directory.
Kenneth
Here is the cabinet that gave the trouble. This cabinet saved fine as is. I changed it to a 28 inches wide, 10 inch left stile on the face frame to make it like a blind cabinet, took off the drawers on the bottom and the center rail there, added a shelf and a door on the bottom.
Then I can't save it as a cabinet anymore. Only as an assembly.
It is not the string of where I try to save it, because I use the same string for other cabients in the same directory.
Kenneth
- Attachments
-
- 3 drawer base 17w.hsf
- (330.02 KiB) Downloaded 342 times
-
- eCabinets Beta Tester
- Posts: 1263
- Joined: Wed, Jul 01 2009, 2:19PM
- Company Name: Halls Edge Inc
- Country: UNITED STATES
- Location: Stamford, CT USA
- Contact:
Re: error in hoops
did exactly what you described, no problems here. All cabinet bodies are there....
jnr
jnr
Josh Rayburn
Hall's Edge, Inc.
CNC Machining Service
Dell Precision T3400
Win7 Professional 64 Bit/Core2Duo E8400 3ghz/4 GB Ram/NVIDIA Quadro FX570
Hall's Edge, Inc.
CNC Machining Service
Dell Precision T3400
Win7 Professional 64 Bit/Core2Duo E8400 3ghz/4 GB Ram/NVIDIA Quadro FX570
-
- New Member
- Posts: 16
- Joined: Wed, Jan 21 2009, 4:49PM
- Company Name: The Kings Woodwright
- Country: CANADA
- Location: Brantford, ON
- Contact:
Re: error in hoops
I had the same problem with error in Hoops... but that one I did not document.
-
- Guru Member
- Posts: 341
- Joined: Sat, Mar 10 2007, 7:31PM
- Company Name: Top Notch Cabinets
- Country: CANADA
- Location: Oakville, Ontario
- Contact:
Re: error in hoops
The error doesn't have anything to do with importing issues. It's a save location issue. It keeps happening to me too. You need to reselect your save location when you try to save the cabinet. It's extremely annoying because it keeps loosing it. There has been an issue with it in beta that I suppose was not resolved completely.
Top Notch Cabinets
http://www.topnotchcabinets.com/
http://www.topnotchcabinets.com/