Can someone help change these into STL please
Moderators: Jason Susnjara, Clint Buechlein
-
- Junior Member
- Posts: 25
- Joined: Sun, Jul 22 2007, 3:00PM
Can someone help change these into STL please
Thanks in advance for any help... or if you can make them ready for use in the program
- Attachments
-
- m2510195_DEDO130.zip
- (70 KiB) Downloaded 607 times
-
- m2510449_VMOC205.zip
- (606.36 KiB) Downloaded 593 times
-
- m2510513_DECU165.zip
- (57.55 KiB) Downloaded 576 times
-
- eCabinets Beta Tester
- Posts: 1585
- Joined: Tue, May 17 2005, 1:16PM
- Location: Norwood Pa.
Re: Can someone help change these into STL please
Here is 2
- Attachments
-
- EC_STL.zip
- (276.46 KiB) Downloaded 591 times
-
- Wizard Member
- Posts: 4723
- Joined: Mon, May 09 2005, 7:33PM
- Company Name: Double E Cabinets
- Country: UNITED STATES
- Location: Amarillo, TX
Re: Can someone help change these into STL please
Jason,
Were all of these .dxf's supposed to be of the same Viking Label?
Kerry
Were all of these .dxf's supposed to be of the same Viking Label?
Kerry
-
- Junior Member
- Posts: 25
- Joined: Sun, Jul 22 2007, 3:00PM
Re: Can someone help change these into STL please
They are suposed to be viking appliances?
-
- Junior Member
- Posts: 25
- Joined: Sun, Jul 22 2007, 3:00PM
Re: Can someone help change these into STL please
Why when I assemble these are they all black? What am I doing wrong?
-
- eCabinets Beta Tester
- Posts: 1585
- Joined: Tue, May 17 2005, 1:16PM
- Location: Norwood Pa.
Re: Can someone help change these into STL please
You have to put your own color in
Multiple Textures on the Same Display Part
Once a Display Part Editor file is loaded, it will need color, texture and a general "look". This software also has the ability to display complex objects that have different color and texture on different parts of the object. This is accomplished by generating a different ".stl" file for each portion of the object, loading each ".stl" file into the Display Part Editor, positioning them with respect to each other and then selecting and texturing each portion separately
Multiple Textures on the Same Display Part
Once a Display Part Editor file is loaded, it will need color, texture and a general "look". This software also has the ability to display complex objects that have different color and texture on different parts of the object. This is accomplished by generating a different ".stl" file for each portion of the object, loading each ".stl" file into the Display Part Editor, positioning them with respect to each other and then selecting and texturing each portion separately
- Attachments
-
- Shot1.jpg (74.07 KiB) Viewed 11861 times
-
- Junior Member
- Posts: 25
- Joined: Sun, Jul 22 2007, 3:00PM
Re: Can someone help change these into STL please
But how do you make stainless steel color, It doesnt look right?
-
- eCabinets Beta Tester
- Posts: 1585
- Joined: Tue, May 17 2005, 1:16PM
- Location: Norwood Pa.
Re: Can someone help change these into STL please
,
- Attachments
-
- Shot3.jpg (56.85 KiB) Viewed 11858 times
-
- Shot4.jpg (69.6 KiB) Viewed 11858 times
-
- eCabinets Beta Tester
- Posts: 1585
- Joined: Tue, May 17 2005, 1:16PM
- Location: Norwood Pa.
Re: Can someone help change these into STL please
Here is one I just used From Viking
Gas Range 42" W
Gas Range 42" W
- Attachments
-
- 1.jpg (65 KiB) Viewed 11848 times
-
- 2.jpg (75.43 KiB) Viewed 11848 times