Just wanted to thank the Thermwood team for all of the help and support over the years. We have a custom cabinet door shop here in Texas and we use a Thermwood 3-axis to make our mdf doors. When we slowed down due to the recession, we came up with some projects that the Thermwood handled with ease. We are making bookends that are done completely on the cnc with the exception of assembly and stain/lacquer. Here is an picture of one completed. Any advice or comments would be greatly appreciated.
Thank You,
Joe Henderson
CNC Programmer
Wood Doors
http://www.woodbookendsonline.com
Thanks to Thermwood
Moderator: Jason Susnjara
-
- Guru Member
- Posts: 622
- Joined: Fri, May 20 2005, 6:48PM
- Company Name: Classic Cabinetry
- Location: Albany Western Australia
- Contact:
Re: Thanks to Thermwood
Hi Joe,
Hope things are getting better for you.
Do you have a web site so I can view your door patterns. What software to generate your door patterns do you use? We do a lot of mdf doors our selves but the software is a bit limited.
Regards
Neville
neville@classiccabinetry dot biz
Hope things are getting better for you.
Do you have a web site so I can view your door patterns. What software to generate your door patterns do you use? We do a lot of mdf doors our selves but the software is a bit limited.
Regards
Neville
neville@classiccabinetry dot biz
Neville Australia