Thanks to Thermwood

Off-topic discussion that doesn't pertain to the other forums.

Moderator: Jason Susnjara

Post Reply
Joe Henderson
New Member
Posts: 2
Joined: Fri, Nov 02 2007, 9:01AM

Thanks to Thermwood

Post by Joe Henderson »

Just wanted to thank the Thermwood team for all of the help and support over the years. We have a custom cabinet door shop here in Texas and we use a Thermwood 3-axis to make our mdf doors. When we slowed down due to the recession, we came up with some projects that the Thermwood handled with ease. We are making bookends that are done completely on the cnc with the exception of assembly and stain/lacquer. Here is an picture of one completed. Any advice or comments would be greatly appreciated.

Image


Thank You,

Joe Henderson

CNC Programmer
Wood Doors
http://www.woodbookendsonline.com
Neville Bastian
Guru Member
Posts: 622
Joined: Fri, May 20 2005, 6:48PM
Company Name: Classic Cabinetry
Location: Albany Western Australia
Contact:

Re: Thanks to Thermwood

Post by Neville Bastian »

Hi Joe,
Hope things are getting better for you.
Do you have a web site so I can view your door patterns. What software to generate your door patterns do you use? We do a lot of mdf doors our selves but the software is a bit limited.
Regards

Neville
neville@classiccabinetry dot biz
Neville Australia
Post Reply