I must be blind or can't see.
Where do I set molding costs? When I go into the Moldings tab where it says "Select Molding to Place" there is a way to set the molding along with miter information but no way to set the cost. There is an area for Unit Purchase Cost and Material Cost to be displayed but, for the life of me, I can't find where to set the cost.
Thanks.
Setting molding costs
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- Guru Member
- Posts: 833
- Joined: Thu, May 14 2009, 11:41PM
- Company Name: Diamond Lake Custom Woodworks
- Location: Newport, WA
- Contact:
Setting molding costs
Sincerely,
Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com
Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com
-
- Wizard Member
- Posts: 4723
- Joined: Mon, May 09 2005, 7:33PM
- Company Name: Double E Cabinets
- Country: UNITED STATES
- Location: Amarillo, TX
Re: Setting molding costs
Donald,
Open preferences then Define Hardware
Click on the Moldings Tab
Find the molding you want and edit the price.
Kerry
Open preferences then Define Hardware
Click on the Moldings Tab
Find the molding you want and edit the price.
Kerry
-
- Guru Member
- Posts: 833
- Joined: Thu, May 14 2009, 11:41PM
- Company Name: Diamond Lake Custom Woodworks
- Location: Newport, WA
- Contact:
Re: Setting molding costs
Thanks Kerry.
I can't tell what unit of measure the price is for. It just shows Price and an text box to enter a price. Can't tell if its by the foot, by the 8' piece, 12' piece, etc.
I can't tell what unit of measure the price is for. It just shows Price and an text box to enter a price. Can't tell if its by the foot, by the 8' piece, 12' piece, etc.
Sincerely,
Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com
Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com
-
- Wizard Member
- Posts: 4723
- Joined: Mon, May 09 2005, 7:33PM
- Company Name: Double E Cabinets
- Country: UNITED STATES
- Location: Amarillo, TX
Re: Setting molding costs
Don,
All the old Conestoga moldings were priced by the 8 ft piece. I am guessing it is still set up that way but it doesn't seem that the moldings are being calculated properly. I can add 1 foot of molding to a cabinet or 24 feet of molding to the cabinet and the buy list just shows a quantity of 1. This area still needs a lot of work.
Kerry
All the old Conestoga moldings were priced by the 8 ft piece. I am guessing it is still set up that way but it doesn't seem that the moldings are being calculated properly. I can add 1 foot of molding to a cabinet or 24 feet of molding to the cabinet and the buy list just shows a quantity of 1. This area still needs a lot of work.
Kerry