CN FREEZING in 5.57&5.56 ALSO(negative dim -507994920mm)

Discuss Thermwood 3-axis Machinery, Controller, and Software.

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Rich Kasten

mohan kommineni
Junior Member
Posts: 97
Joined: Fri, Mar 20 2009, 8:01AM
Company Name: ADP STORE FIXTURES
Country: AUSTRALIA
Location: PERTH-AUSTRALIA

CN FREEZING in 5.57&5.56 ALSO(negative dim -507994920mm)

Postby mohan kommineni » Mon, Apr 19 2010, 12:18AM

HI all
we are facing a problem in cn5.57 & 5.56 after loading the job we can find the drawer box sides and front coming up with a very big negative dimension and causing system freeze but practically there are no left and right and front sides on this drawer box as we are using metal slides standard part
what is causing the mess and negative dim -507994920mm


mohan
Attachments
ControlNest5-57.cab.txt
machine export file
(69.49 KiB) Downloaded 65 times
CC_PF_1155twd.txt
twd file
(224 KiB) Downloaded 66 times
dimension issue.JPG
snap shot of negative dimension of drw box which doesnt exist
dimension issue.JPG (124.44 KiB) Viewed 1084 times
Last edited by mohan kommineni on Mon, Apr 19 2010, 12:30AM, edited 1 time in total.

mohan kommineni
Junior Member
Posts: 97
Joined: Fri, Mar 20 2009, 8:01AM
Company Name: ADP STORE FIXTURES
Country: AUSTRALIA
Location: PERTH-AUSTRALIA

Re: CN FREEZING in 5.57&5.56 ALSO(negative dim -507994920mm)

Postby mohan kommineni » Mon, Apr 19 2010, 12:29AM

i have attached the esj file in this post as the previous post was not allowing more than 3 attachments


pls some one go through it and suggest what is causing
thanks to one and all

mohan
Attachments
CC_PF_1155.esj
esj file of the above counter
(1.25 MiB) Downloaded 63 times

User avatar
Larry Epplin
Thermwood Team
Posts: 644
Joined: Tue, May 17 2005, 12:44PM
Location: Thermwood

Re: CN FREEZING in 5.57&5.56 ALSO(negative dim -507994920mm)

Postby Larry Epplin » Mon, Apr 19 2010, 3:06PM

This is an issue with eCabinets that will be resolved in the next update to Version 6. There were changes performed for optimization in Control Nesting that exposed the error from eCabinets. Until the release of Version 6 Build 4 you will need to uncheck these problem parts in the Load screen. Sorry for the inconvenience.

mohan kommineni
Junior Member
Posts: 97
Joined: Fri, Mar 20 2009, 8:01AM
Company Name: ADP STORE FIXTURES
Country: AUSTRALIA
Location: PERTH-AUSTRALIA

Re: CN FREEZING in 5.57&5.56 ALSO(negative dim -507994920mm)

Postby mohan kommineni » Mon, Apr 19 2010, 5:59PM

Larry Epplin wrote:This is an issue with eCabinets that will be resolved in the next update to Version 6. There were changes performed for optimization in Control Nesting that exposed the error from eCabinets. Until the release of Version 6 Build 4 you will need to uncheck these problem parts in the Load screen. Sorry for the inconvenience.



hi larry
i can understand what you aretrying to tell here but at this stage how can one resolve the issue in version 6 build 4 when we are using version 5.0 yet
pls avice

thanks
mohan

User avatar
Larry Epplin
Thermwood Team
Posts: 644
Joined: Tue, May 17 2005, 12:44PM
Location: Thermwood

Re: CN FREEZING in 5.57&5.56 ALSO(negative dim -507994920mm)

Postby Larry Epplin » Mon, Apr 19 2010, 9:21PM

I recommend upgrading to Version 6.0 Build 4 upon it's release.

mohan kommineni
Junior Member
Posts: 97
Joined: Fri, Mar 20 2009, 8:01AM
Company Name: ADP STORE FIXTURES
Country: AUSTRALIA
Location: PERTH-AUSTRALIA

Re: CN FREEZING in 5.57&5.56 ALSO(negative dim -507994920mm)

Postby mohan kommineni » Tue, Apr 20 2010, 1:11AM

Larry Epplin wrote:I recommend upgrading to Version 6.0 Build 4 upon it's release.


hi larry u mean to sAy version 5 is no longer supported or u peolple are forcing us to switch to version 6

mohan kommineni
Junior Member
Posts: 97
Joined: Fri, Mar 20 2009, 8:01AM
Company Name: ADP STORE FIXTURES
Country: AUSTRALIA
Location: PERTH-AUSTRALIA

Re: CN FREEZING in 5.57&5.56 ALSO(negative dim -507994920mm)

Postby mohan kommineni » Tue, Apr 20 2010, 1:14AM

Larry Epplin wrote:I recommend upgrading to Version 6.0 Build 4 upon it's release.

hi larry
i also noticed one more issue in cn once nested if gong back into load menu due to any reson all the dimensions are in inches we are using mm
this is really mess try to suggest
thanks

User avatar
Larry Epplin
Thermwood Team
Posts: 644
Joined: Tue, May 17 2005, 12:44PM
Location: Thermwood

Re: CN FREEZING in 5.57&5.56 ALSO(negative dim -507994920mm)

Postby Larry Epplin » Tue, Apr 20 2010, 7:33AM

Looks like part width and length are getting multiplied by 25.4 an additional time when returning to the Load screen. This will be resolved in Control Nesting 5.58.

eCabinet Systems Version 5.2 will expire June 1, 2010.


Return to “Thermwood 3-Axis Machinery”

Who is online

Users browsing this forum: No registered users and 1 guest