Demonstration of MDF doors being modeled on a Thermwood CabinetShop 43. The doors were created in the Part Editor of eCabinet Systems, and then sent to the CabinetShop 43.
Thermwood CabinetShop 43 modeling mdf doors
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- Thermwood Team
- Posts: 248
- Joined: Tue, May 10 2005, 12:54PM
- Location: Thermwood
Thermwood CabinetShop 43 modeling mdf doors
Thanks,
Duane Marrett
Thermwood/eCabinet Systems
Duane Marrett
Thermwood/eCabinet Systems
-
- Guru Member
- Posts: 559
- Joined: Wed, May 18 2005, 6:59PM
- Company Name: CNC Automation
- Country: CANADA
- Location: St. Zotique, Québec, Canada
- Contact:
Re: Thermwood CabinetShop 43 modeling mdf doors
Duane,
Is there supposed to be a video or link?
Is there supposed to be a video or link?
-
- eCabinets Beta Tester
- Posts: 1263
- Joined: Wed, Jul 01 2009, 2:19PM
- Company Name: Halls Edge Inc
- Country: UNITED STATES
- Location: Stamford, CT USA
- Contact:
Re: Thermwood CabinetShop 43 modeling mdf doors
Dude that's some awesome music at the end!
Josh Rayburn
Hall's Edge, Inc.
CNC Machining Service
Dell Precision T3400
Win7 Professional 64 Bit/Core2Duo E8400 3ghz/4 GB Ram/NVIDIA Quadro FX570
Hall's Edge, Inc.
CNC Machining Service
Dell Precision T3400
Win7 Professional 64 Bit/Core2Duo E8400 3ghz/4 GB Ram/NVIDIA Quadro FX570
-
- Guru Member
- Posts: 622
- Joined: Fri, May 20 2005, 6:48PM
- Company Name: Classic Cabinetry
- Location: Albany Western Australia
- Contact:
Re: Thermwood CabinetShop 43 modeling mdf doors
Great Video Duane,
Looks like about 9 doors? What was the machine time to do those?
If the client wants some 4 pane glass doors can you design that to match the design shown on youtube? What would be the process time?
Regards
Neville
Looks like about 9 doors? What was the machine time to do those?
If the client wants some 4 pane glass doors can you design that to match the design shown on youtube? What would be the process time?
Regards
Neville
Neville Australia
-
- Thermwood Team
- Posts: 39
- Joined: Tue, Jun 28 2005, 9:19AM
Re: Thermwood CabinetShop 43 modeling mdf doors
Neville,
These doors were around a 20 minute run time each. That will vary depending on the step over amount set in Profile Modeler. The doors were created in eCabinet Systems through the part editor, so to answer you second question yes you could create a 4 pane glass door. Run time for that would depend on the detail in the styles and rails you make and again the step over distance. Thank you.
These doors were around a 20 minute run time each. That will vary depending on the step over amount set in Profile Modeler. The doors were created in eCabinet Systems through the part editor, so to answer you second question yes you could create a 4 pane glass door. Run time for that would depend on the detail in the styles and rails you make and again the step over distance. Thank you.
-
- Guru Member
- Posts: 622
- Joined: Fri, May 20 2005, 6:48PM
- Company Name: Classic Cabinetry
- Location: Albany Western Australia
- Contact:
Re: Thermwood CabinetShop 43 modeling mdf doors
Thanks Brent,
We have about 25 doors per average kitchen, so we are looking about 8 hrs work.
On a unique style I can justify the time but on a standard pattern where we have the correct shaped router bits in place I will have to continue with my legacy software.
Thanks for the reply
Regards Neville
We have about 25 doors per average kitchen, so we are looking about 8 hrs work.
On a unique style I can justify the time but on a standard pattern where we have the correct shaped router bits in place I will have to continue with my legacy software.
Thanks for the reply
Regards Neville
Neville Australia