Hi Guys,
I have exploited the limits of CN5.58 and I managed to get it in trouble and eventually crash it.
I always thought that overall cabinet quantity should overwrite the part quantity. If you select that you need x amount of that part in a cabinet that you want y times, you automatically get y amount of that part as well. Please check my attached pictures and export.
What I tried to do is cut some parts from a cabinet that I already cut 6 times. I deselected everything and selected only that one part. It showed the right quantity - 1piece. Then I found I need one more piece of a different part so instead of selecting it the same way I changed the overall cabinet quantity to 1 and the part that I previously changed quantity of showed on screen with negative value. If you decide to cut that negative value you basically crash CN.
Please take a look and let me know if I can assist you with anything else.
Quantity Issue
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Jim Bullis
-
- Guru Member
- Posts: 341
- Joined: Sat, Mar 10 2007, 7:31PM
- Company Name: Top Notch Cabinets
- Country: CANADA
- Location: Oakville, Ontario
- Contact:
Quantity Issue
- Attachments
-
- Quatity Issue.zip
- (834.18 KiB) Downloaded 376 times
Top Notch Cabinets
http://www.topnotchcabinets.com/
http://www.topnotchcabinets.com/
-
- Thermwood Team
- Posts: 668
- Joined: Tue, May 17 2005, 12:44PM
- Location: Thermwood
Re: Quantity Issue
Your suggestion would help simplify the option. We'll get this quirk sorted out. Thanks for the input.