Hi all,
I want to place some smaller upper cabinets on top of my regular upper cabs. How do I set the placement height so these will fit on top?
Thanks
Cabinet height placement
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- Senior Member
- Posts: 199
- Joined: Sat, Jul 29 2006, 9:11AM
- Company Name: Classic Custom Wood
- Location: NC Iowa
- Contact:
-
- Thermwood Team
- Posts: 1740
- Joined: Tue, May 17 2005, 12:44PM
- Company Name: Thermwood Corporation
- Location: Thermwood Corp: Dale, Indiana
- Contact:
Re: Cabinet height placement
Ray,
Right-click and go to Define Standard Dimensions (also can be accessed via settings and preferences). From there set the Upper Cabinet Mounting Height to what you need. Remember, this is from floor to top of the upper cabinet.
Right-click and go to Define Standard Dimensions (also can be accessed via settings and preferences). From there set the Upper Cabinet Mounting Height to what you need. Remember, this is from floor to top of the upper cabinet.
Regards,
Scott Vaal
-Thermwood/eCabinet Systems-
Dell Precision / Xeon E3-1240 / 8GB RAM /NVIDIA Quadro K2000
Scott Vaal
-Thermwood/eCabinet Systems-
Dell Precision / Xeon E3-1240 / 8GB RAM /NVIDIA Quadro K2000
-
- Senior Member
- Posts: 199
- Joined: Sat, Jul 29 2006, 9:11AM
- Company Name: Classic Custom Wood
- Location: NC Iowa
- Contact:
Re: Cabinet height placement
Thanks Scott. That did it. I have done it in past versions, but couldn't figure it out here.