Next Release Question

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal

Josh Rayburn
eCabinets Beta Tester
Posts: 1263
Joined: Wed, Jul 01 2009, 2:19PM
Company Name: Halls Edge Inc
Country: UNITED STATES
Location: Stamford, CT USA
Contact:

Next Release Question

Postby Josh Rayburn » Tue, Nov 09 2010, 10:58AM

So, I was just wondering - is the combination blind dado with 1/8" pilot holes through the center going to be included in the next release?
Just curious
:mrgreen:
Josh Rayburn
Hall's Edge, Inc.
CNC Machining Service


Dell Precision T3400
Win7 Professional 64 Bit/Core2Duo E8400 3ghz/4 GB Ram/NVIDIA Quadro FX570

Thom Davies
Guru Member
Posts: 530
Joined: Tue, May 17 2005, 6:44PM
Company Name: Dawn Group
Country: NEW ZEALAND
Location: Christchurch New Zealand

Re: Next Release Question

Postby Thom Davies » Tue, Nov 09 2010, 2:11PM

Josh!

I'd love to have have that to! Please thermwood can u put it on the list? Mayb very near the top of it! like number 5!

Josh Rayburn
eCabinets Beta Tester
Posts: 1263
Joined: Wed, Jul 01 2009, 2:19PM
Company Name: Halls Edge Inc
Country: UNITED STATES
Location: Stamford, CT USA
Contact:

Re: Next Release Question

Postby Josh Rayburn » Tue, Nov 09 2010, 2:29PM

that would seriously save me so many hours of work at this point I would make it numero uno if I could!
Josh Rayburn
Hall's Edge, Inc.
CNC Machining Service


Dell Precision T3400
Win7 Professional 64 Bit/Core2Duo E8400 3ghz/4 GB Ram/NVIDIA Quadro FX570

jason galbraith
Senior Member
Posts: 249
Joined: Wed, Dec 10 2008, 3:29PM
Company Name: Eastcoast Ultimate
Country: AUSTRALIA
Contact:

Re: Next Release Question

Postby jason galbraith » Tue, Nov 09 2010, 6:06PM

add me to the list that needs this feature:)
Core i7-2600 @ 3.70Ghz - 8 GB ram - Win 7 Ultimate 64bit - 2 x 24" ASUS monitors - Nvidia 600 Quadro 1GB graphics
www.eastcoastultimate.com.au

Michael S Murray
eCabinets Beta Tester
Posts: 933
Joined: Tue, May 17 2005, 2:48PM
Location: Logansport, In
Contact:

Re: Next Release Question

Postby Michael S Murray » Tue, Nov 09 2010, 7:24PM

I would gladly pay many pizzas for that one........ :D :D
Mike Murray
Versatile Cabinet & Solid Surface
mike@versatilecabinet.com
http://www.versatilecabinet.com

Bryan J Tanner
Guru Member
Posts: 270
Joined: Wed, Mar 18 2009, 4:51AM
Company Name: Decor Designz
Location: Paeroa NZ
Contact:

Re: Next Release Question

Postby Bryan J Tanner » Tue, Nov 09 2010, 7:52PM

If I had a CNC(cue violins) that would be top of my list. Oh, for a CNC :| :| :|

Oh for enough work to buy a CNC!!!! :D :D :D :D
HP Pavilion DV6
2.27 gigahertz Intel Core i5 M 430
3064 Megabytes Usable Installed Memory
NVIDIA GeForce GT 230M
Windows 7 Home Premium

Gary Campbell
Guru Member
Posts: 256
Joined: Sat, Apr 04 2009, 6:27PM
Company Name: ShopBot Tools Inc
Country: UNITED STATES
Location: Durham NC

Re: Next Release Question

Postby Gary Campbell » Tue, Nov 09 2010, 8:32PM

Add me to that list. Of couse having it work with full dados as well.
Gary Campbell
ShopBot Tools Production Support

ShopBot (eCabinets) Link Training & Support

Michael S Murray
eCabinets Beta Tester
Posts: 933
Joined: Tue, May 17 2005, 2:48PM
Location: Logansport, In
Contact:

Re: Next Release Question

Postby Michael S Murray » Tue, Nov 09 2010, 8:56PM

assembly marks on full or blind dados with auto located screw pilot holes, GO THM TEAM!!!!!!!!!!!!!
That would be a very serious improvement..
Mike Murray
Versatile Cabinet & Solid Surface
mike@versatilecabinet.com
http://www.versatilecabinet.com

Gary Campbell
Guru Member
Posts: 256
Joined: Sat, Apr 04 2009, 6:27PM
Company Name: ShopBot Tools Inc
Country: UNITED STATES
Location: Durham NC

Re: Next Release Question

Postby Gary Campbell » Tue, Nov 09 2010, 9:43PM

Michael...
We are so close. The technology is in the software, aka rafix fasteners. We CAN set an 1/8" hole for a screw pilot and have it applied to the proper location. We just CANT select them WITH dado joinery. The 2 are mutually exclusive via select one from a drop down list.

I wish for 2 things: 1) That the TWD crew will realize this is a good feature, even tho some users could "shoot themselves in the foot" with it. and 2) that the amount of work to allow these 2 now separate joinery methods to coexist can be accomplished relatively easy.

This would be sooooo much easier than placing and constraining partial depth pilot holes on the reverse side of the sheet as to not conflict with BL dado cuts. This operation was made possible by using the "FlipOpsFIrst" for the drilling (and other reverse side machining). It was not even considered using the individual flip ops feature. Sheet cycle time can be reduced substantially by having these holes drilled "face up"
Gary Campbell
ShopBot Tools Production Support

ShopBot (eCabinets) Link Training & Support

Michael S Murray
eCabinets Beta Tester
Posts: 933
Joined: Tue, May 17 2005, 2:48PM
Location: Logansport, In
Contact:

Re: Next Release Question

Postby Michael S Murray » Tue, Nov 09 2010, 9:56PM

Gary, I do it without using the flip op first option.
I go in to the part editor and locate a hole and drill it through the dado(ONE AT A TIME). ITs slow and does not follow the shelf,strecher, whatever if you change the cabinet size..
Mike Murray
Versatile Cabinet & Solid Surface
mike@versatilecabinet.com
http://www.versatilecabinet.com

Neville Bastian
Guru Member
Posts: 622
Joined: Fri, May 20 2005, 6:48PM
Company Name: Classic Cabinetry
Location: Albany Western Australia
Contact:

Re: Next Release Question

Postby Neville Bastian » Tue, Nov 09 2010, 10:37PM

A no brainer really. Bring it on.
I guess the Thermwood programmers say why are they making such a big thing about drilling a hole manually. Well, I have junior workers who can't judge the centre of the groove nor can drill it at 90 degrees in the z axis. Then if you deal with a few self assemblers you have to drill these for them and sometimes forget to do this process.

I could confuse things, about drilling the drawer fronts for drawer front metal fixing brackets for the next release but Dan Epps will tell me off.

Regards

Neville
Neville Australia

Gary Campbell
Guru Member
Posts: 256
Joined: Sat, Apr 04 2009, 6:27PM
Company Name: ShopBot Tools Inc
Country: UNITED STATES
Location: Durham NC

Re: Next Release Question

Postby Gary Campbell » Tue, Nov 09 2010, 10:55PM

Michael...
I tried this in the past, and had not so perfect results. For some reason, the SB Link didnt like the overlapping geometries. This may have been changed in later versions. Add the inability to constrain the holes to the dados.... and you have a recipe... well you know.

Neville...
I was surprised how many shops we cut for in S. FL that wanted the pilot holes. For some reason they had absolutely no confidence that the guys on the floor could locate and install a screw properly.
Gary Campbell
ShopBot Tools Production Support

ShopBot (eCabinets) Link Training & Support

Matt Snowball
Junior Member
Posts: 30
Joined: Wed, Jun 04 2008, 5:00AM

Re: Next Release Question

Postby Matt Snowball » Wed, Nov 10 2010, 4:16AM

Pilot holes applied with full dadoes would be very useful to me as well .

JohnLashuay
Guru Member
Posts: 645
Joined: Mon, Nov 20 2006, 3:39PM
Company Name: Rylex Custom Cabinetry-Close
Country: UNITED STATES
Location: Pine Island, New York
Contact:

Re: Next Release Question

Postby JohnLashuay » Wed, Nov 10 2010, 7:33AM

Count me in on this as well!
Rylex Custom Cabinetry & Closets
http://www.rylexonline.com
Thermwood CS 43

Josh Rayburn
eCabinets Beta Tester
Posts: 1263
Joined: Wed, Jul 01 2009, 2:19PM
Company Name: Halls Edge Inc
Country: UNITED STATES
Location: Stamford, CT USA
Contact:

Re: Next Release Question

Postby Josh Rayburn » Wed, Nov 10 2010, 7:56AM

Gary,
You're right, the technology is in the software already. I do the same as you with pilot holes as an RTA pattern, and the problem is that holes created by JOINERY functions cannot overlap or else the "outline" of the joinery is affected (i.e. the compin on the blind dado itself that is created as a result)....HOWEVER....a part editor hole properly constrained CAN overlap the dado, even the edge of the dado, without ill effect. This can be done from either side of the part, and does not have to be stopped even with the depth of the dado from the opposite side. This seems to be created as a separate DRILL operation and does not interfere with the blind (or full) dadoes' compin operation that is generated by the post.

So ultimately we're doing it already - we just need a better or automated way to do it. The technology to place holes automatically and space them (like an RTA pattern, i.e. distance from edge, and max space between) properly is there too - so I only wonder, being a simpleton who knows nothing about programming, could it be easily incorporated or modified to give us all what we seek?
It seems by the responses thus far that this would be a very worthwhile feature, hopefully this might convince TWD to take a good look and put it towards the top of the wish list...?
jnr :D
Josh Rayburn
Hall's Edge, Inc.
CNC Machining Service


Dell Precision T3400
Win7 Professional 64 Bit/Core2Duo E8400 3ghz/4 GB Ram/NVIDIA Quadro FX570


Return to “eCabinet Systems Software”

Who is online

Users browsing this forum: Bing [Bot], Semrush [Bot] and 8 guests